{"revision":"c10276e953456835cdbb1f3a60d58ae1980be353","document":{"id":31381,"path":"it-operations-management/service-mapping/r_NonSudoCommands.md","title":"Service Mapping commands not requiring a privileged user","bundle":null,"doc_type":null,"release":"australia","body":"\n# Service Mapping commands not requiring a privileged user\n\nMost of commands utilized by Service Mapping for discovery and mapping do not require elevated rights.\n\nReview this list of commands to understand how Service Mapping uses them and to make sure that the virtual security of your company is not compromised.\n\nYou do not run these commands directly. Service Mapping uses commands requiring elevated rights as part of the following processes:\n\n-   host detection\n-   process identification on port\n-   discovering CIs using patterns\n\n## Operating systems\n\n<table id=\"table_cwj_cjz_j5\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`awk`\n\n</td><td>\n\nvarious options\n\n</td><td>\n\nParses the string.\n\n</td></tr><tr><td>\n\n`istat`\n\n</td><td>\n\n**file\\_name**\n\n</td><td>\n\nGets last modification time of file.\n\n</td></tr><tr><td>\n\n`nslookup`\n\n</td><td>\n\n**hostname**\n\n</td><td>\n\nResolve DNS host name.\n\n</td></tr><tr><td>\n\n`ping`\n\n</td><td>\n\n**-c count ip/host**\n\n</td><td>\n\nPings the host.\n\n</td></tr><tr><td>\n\n`arp -an`\n\n</td><td>\n\nvarious options\n\n</td><td>\n\nShows ARP table.\n\n</td></tr><tr><td>\n\n`grep`\n\n</td><td>\n\nString to search\n\n</td><td>\n\nFinds string in previous command output.\n\n</td></tr><tr><td>\n\n`traceroute`\n\n</td><td>\n\n**-n ip\\_address**\n\n</td><td>\n\nShows layer 3 network route to target host.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\n**-an**\n\n **-Aan**\n\n</td><td>\n\nShows open network connections.\n\n</td></tr><tr><td>\n\n`ps`\n\n</td><td>\n\n**-eo user, pid, ppid, comm, args**\n\n</td><td>\n\nGets the process list.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nDirectory and parameters to search\n\n</td><td>\n\nSearches for files by name or type.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`ping`|**-c count ip/host**|Pings the host.|\n|`arp -an`| |Shows the ARP table.|\n|`grep`|String to search|Finds string in previous command output.|\n|`awk`|various options|Parses the string.|\n|`traceroute`|**-n ip\\_address**|Shows layer 3 network route to target host.|\n|`netstat`|**-an**|Shows open network connections.|\n|`ps`|**-eo user, pid, ppid, comm, args**|Gets the process list.|\n|`find`|Directory and parameters for search|Searches for files by name or type.|\n\n|Commands|Parameter|Description|\n|--------|---------|-----------|\n|`sysvar`|**SYSNAME**|Gets the system name.|\n|`hostname`| |Retrieves the device name.|\n|`grep`|String to search|Finds the string in command output.|\n|`hostname`|**-**|Gets the hostname.|\n|`netstat`|**-g \\| awk '\\{if \\(NR&gt;4\\) print \\\\$1,\\\\$3\\}'**|Gets network information.|\n|`netstat`|**-r \\| awk '\\{if \\(NR&gt;3\\) print \\\\$1,\\\\$2,\\\\$5\\}'**|Gets gateway information.|\n|`netstat`|**-h \\| awk '\\{if \\(NR&gt;4\\) print \\\\$1\\}' \\| grep -v '127.0.0.1'**|Gets IP array.|\n|`netstat`|**-R ALL \\| awk '\\{if \\(NR&gt;1\\) print \\\\$0\\}'**|Gets interfaces.|\n|`netstat`|**df -k \\| awk '\\{print \\\\$1,\\\\$2\\}' \\|sed -e s'/\\(//' \\| sed -e s'/\\)//' 2&gt; /dev/null**|Gets the file system information.|\n|`ps`|**-**|Gets the process list.|\n|`ls`|Various options|Lists files and folders in the specified folder.|\n|`cat`|**file-name**|Shows the file content.|\n|`cut`|Various options|Splits the output according to entered parameters.|\n|`uname`|**l, v, rm, s**|Gets the OS type.|\n\n<table id=\"table_nss_llv_p5\"><thead><tr><th>\n\nCommands\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`nslookup`\n\n</td><td>\n\n**hostname**\n\n</td><td>\n\nResolves the DNS host name.\n\n</td></tr><tr><td>\n\n`ping`\n\n</td><td>\n\n**-c count ip**\n\n **host**\n\n</td><td>\n\nPings the host.\n\n</td></tr><tr><td>\n\n`arp`\n\n</td><td>\n\n**-an/n**\n\n</td><td>\n\nShows the ARP table.\n\n</td></tr><tr><td>\n\n`lp n`\n\n</td><td>\n\n**-an/n**\n\n</td><td>\n\nShows the ARP table.\n\n</td></tr><tr><td>\n\n`grep`\n\n</td><td>\n\nString to search\n\n **-v**\n\n **hypervisor**\n\n **proc**\n\n **cpuinfo**\n\n **-i 'attached scsi'**\n\n **var**\n\n **log**\n\n **dmesg**\n\n **'SCSI device'**\n\n **'Disk**\n\n **UUID**\n\n</td><td>\n\nFinds the string in previous command output.\n\n</td></tr><tr><td>\n\n`awk`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nParses the string.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\n**-an**\n\n</td><td>\n\nShows open network connections.\n\n</td></tr><tr><td>\n\n`ss`\n\n</td><td>\n\n**-an**\n\n</td><td>\n\nShows open network connections.\n\n</td></tr><tr><td>\n\n`ps`\n\n</td><td>\n\n**-eo user, pid, ppid, comm, args, wwwx**\n\n</td><td>\n\nGets the process list.\n\n</td></tr><tr><td>\n\n`egrep`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nSearches text in previous command output.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nDirectory and parameters for search\n\n</td><td>\n\nSearches for files by name or type.\n\n</td></tr><tr><td>\n\n`traceroute`\n\n</td><td>\n\n**-n ip\\_address**\n\n</td><td>\n\nShows the layer 3 network route to target host.\n\n</td></tr><tr><td>\n\n`df`\n\n</td><td>\n\n**-kP, echo**\n\n</td><td>\n\nExtracts the information about the file system, including the size in KB.\n\n</td></tr><tr><td>\n\n`uptime`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nShows the current time, how long the system has been running, how many users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes.\n\n</td></tr><tr><td>\n\n`date`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nDisplays the date in the time zone on which Linux operating system is configured.\n\n</td></tr><tr><td>\n\n`perl`\n\n</td><td>\n\n**-e 'print time**\n\n</td><td>\n\nOpens the Perl shell and prints time.\n\n</td></tr><tr><td>\n\n`command`\n\n</td><td>\n\n**-v vxprint**\n\n</td><td>\n\nThis command is used in the Debug mode.\n\n</td></tr><tr><td>\n\n`uname`\n\n</td><td>\n\n**-a**\n\n **-r**\n\n</td><td>\n\nDisplays the information about the system.\n\n</td></tr><tr><td>\n\n`ipfconfig`\n\n</td><td>\n\n**-a**\n\n</td><td>\n\nShows the configuration of the network interface.\n\n</td></tr><tr><td>\n\n`ip`\n\n</td><td>\n\nroute list\n\n **-4 -o addr show**\n\n **-6 -o a**\n\n **r**\n\n String to parse\n\n</td><td>\n\nDisplays information about network interface, including the routing table.\n\n</td></tr><tr><td>\n\n`route`\n\n</td><td>\n\n**-n**\n\n</td><td>\n\nShows the IP routing table.\n\n</td></tr><tr><td>\n\n`ip r`\n\n</td><td>\n\n \n\n</td><td>\n\nShows the IP routing table.\n\n</td></tr><tr><td>\n\n`sed`\n\n</td><td>\n\n**-n '2!p'**\n\n</td><td>\n\nExecutes a function using the SED stream editor.\n\n</td></tr><tr><td>\n\n`bash`\n\n</td><td>\n\n**-c**\n\n</td><td>\n\nExecutes the command using the UNIX shell or command language.\n\n</td></tr><tr><td>\n\n`waagent`\n\n</td><td>\n\n**-version 2&gt;/dev/null**\n\n</td><td>\n\nDisplays the information extracted from the Microsoft Azure Linux agent.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`nslookup`|**hostname**|Resolves the DNS host name.|\n|`ping`|**-c count ip/host**|Pings the host.|\n|`arp`|**-an**|Shows the ARP table.|\n|`grep`|String to search|Finds the string in previous command output.|\n|`awk`|Various options|Parses the string.|\n|`traceroute`|**-n ip\\_address**|Shows the layer 3 network route to target host.|\n|`netstat`|**-an**|Shows the open network connections.|\n|`zoneadm`|**List**|Shows the list of zones.|\n|`egrep`|Various options|Searches text in previous command output.|\n|`find`|Directory and parameters|Searches for files by name or type.|\n\n|Query|Description|\n|-----|-----------|\n|`Select * from Win32_ComputerSystem`|Gets the server basic information like serial number.|\n|`Select LastModified from CIM_LogicalFile Where Name=...`|Gets the last modification time of a file.|\n|`Select AddressWidth from Win32_Processor`|Gets the computer architecture \\(32 bit or 64 bit\\).|\n|`Select * From Win32_Process where (ProcessId = ?)`|Gets the process list running on the computer.|\n|`Select Name from CIM_LogicalDisk`|Gets the file systems on the computer, such as C: or D:.|\n|`Select FileName, Extension from CIM_Directory where Drive=’drive’ and Path='path'`|Gets the list of files in a specific directory.|\n\n<table id=\"table_cqd_svz_j5\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`get_process_info.exe`\n\n</td><td>\n\n**Process\\_id**\n\n</td><td>\n\nExtracts information on the processes using executable created by ServiceNow.\n\n</td></tr><tr><td>\n\n`type`\n\n</td><td>\n\n**File\\_name**\n\n</td><td>\n\nShows the text file content.\n\n</td></tr><tr><td>\n\n`nslookup`\n\n</td><td>\n\n**Host\\_name**\n\n</td><td>\n\nDNS lookup\n\n</td></tr><tr><td>\n\n`arp`\n\n</td><td>\n\n**-a**\n\n</td><td>\n\nShows the ARP table.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\n**-ano**\n\n</td><td>\n\nShows the network connections.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nFinds the string in the previous command output.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\n**/q**\n\n **/s /b**\n\n</td><td>\n\nLists files in the directories.\n\n</td></tr><tr><td>\n\n`paping`\n\n</td><td>\n\n**--nocolor -c 1 -p**\n\n **port\\_num**\n\n **ip\\_address**\n\n</td><td>\n\nUtility to run TCP ping against given host.\n\n</td></tr><tr><td>\n\n`ping`\n\n</td><td>\n\n**-n 1**\n\n **ip\\_address/host**\n\n</td><td>\n\nPings the host.\n\n</td></tr><tr><td>\n\n`tracert`\n\n</td><td>\n\n**Ip\\_address**\n\n</td><td>\n\nShows the layer 3 network route to the target host.\n\n</td></tr></tbody>\n</table>## Applications\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`show partition`|Various options|Get the partition configured.|\n|`sh-run all-partitions`|Various options|Get details like virtual-server, port, service group, and pool members information.|\n|`show slb virtual-server all-partitions`|Various options|Get the status of the virtual server and hit count details.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n|`msg_server`|**-V**|Gets the version.|\n|`ping`|**-n 1**|\\(For Windows only\\) Verifies that the host is answering.|\n|`netstat`|Various options|Lists open ports.|\n|`ss`|Various options|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|Various options|Gets open ports on|\n|`ss`|Various options|Lists open ports.|\n|`hostname`|**-**|Gets the hostname.|\n|`dir`|Various options|Lists all files in the specified folder.|\n\n<table id=\"table_z5m_x1y_n5\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`httpd`\n\n</td><td>\n\n**-V**\n\n</td><td>\n\nGets the version.\n\n</td></tr><tr><td>\n\n`cut`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nSplits the output line.\n\n</td></tr><tr><td>\n\n`opmnctl`\n\n</td><td>\n\n**status -fmt %cmp32%prt32%por40%pid**\n\n and\n\n **@farm status -noheaders -fsep \"\\|\" -fmt %cmp%prt%clu%ins%por**\n\n</td><td>\n\nThis command is used only for discovering the OC4J connectivity.Gets the status of the OPMN CTRL service.\n\n</td></tr><tr><td>\n\n`sort`\n\n</td><td>\n\n**-u**\n\n</td><td>\n\nThis command is used only for discovering the Weblogic connectivity. Sorts the output.\n\n</td></tr></tbody>\n</table><table id=\"table_iln_xx2_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`httpd.exe`\n\n</td><td>\n\n**-V**\n\n</td><td>\n\nGets the version.\n\n</td></tr><tr><td>\n\n`opmnctl`\n\n</td><td>\n\n**status -fmt %cmp32%prt32%por40%pid**\n\n and\n\n **@farm status -noheaders -fsep \"\\|\" -fmt %cmp%prt%clu%ins%por**\n\n</td><td>\n\nThis command is used only for discovering the OC4J connectivity.Gets the status of the OPMN CTRL service.\n\n</td></tr></tbody>\n</table><table id=\"table_zll_fwl_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(On Windows only\\) Lists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(On Windows only\\) Extracts strings from the output.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(For Windows only\\) Finds specific strings in files and folders.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\n**-name**\n\n</td><td>\n\nCreates the web services connections. Finds specific strings in files and folders.\n\n</td></tr><tr><td>\n\n`version.sh/version.bat`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nGets the Tomcat version.\n\n</td></tr><tr><td>\n\n`java -cp \" + $install_directory + \"/lib/catalina.jar org.apache.catalina.util.ServerInfo`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nGets the Tomcat version.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists the open ports.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\n**-name**\n\n</td><td>\n\nThis command is used only for creating the web services connections. Finds specific strings in files and folders.\n\n</td></tr><tr><td>\n\n`ss`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(For Linux only\\) Lists the open ports.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`find`|Various options|\\(For Windows only\\) Finds specific strings in files and folders.|\n|`version.sh/version.bat`|**-**|Gets the Tomcat version.|\n|`netstat`|Various options|\\(Windows only\\) Lists the open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`netstat`|Various options|\\(On Windows only\\) Lists open ports.|\n|`grep`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n\n<table id=\"table_bpb_m3p_55\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`show`\n\n</td><td>\n\n**/gtm pool \\[wide\\_ip\\_pool\\_4\\_cmd\\[1\\].pool\\] members**\n\n</td><td>\n\nThis command is used only to create connections to pool members.\n\nGets the pool members.\n\n</td></tr><tr><td>\n\n`list`\n\n</td><td>\n\n**/gtm server \\[servers\\_from\\_cmd\\[\\].server\\] addresses**\n\n</td><td>\n\nThis command is used only to create connections to pool members.\n\nLists the alias server addresses.\n\n</td></tr></tbody>\n</table><table id=\"table_d42_2kf_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`b`\n\n</td><td>\n\n**rule \\[rule name\\] list**\n\nand\n\n**virtual address \\[entry\\_point.ip\\_address\\]**\n\n</td><td>\n\nThis command is used only for creating connections from rules.Lists existing rules on BIGPipe.\n\n</td></tr><tr><td>\n\n`list`\n\n</td><td>\n\n**ltm rule \\[rule name\\]**\n\n and\n\n **data-group wts\\_routing\\_destination\\_prod \\| grep -A 1 \\[ep\\_uri\\]**\n\n</td><td>\n\nThis command is used only for creating connections from rules.Lists existing rules on TMSH.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`show cm traffic-group – get`|Various options|This command is used to get traffic and clustering information.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|\\(For Windows only\\) Extracts strings from the output.|\n|`netstat`|Various options|\\(For Windows only\\) Lists open ports.|\n\n<table id=\"table_mbs_1y2_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(For Windows only\\) Extracts strings from the output.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(For Windows only\\) Lists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only to create connections to Control M Server.Finds file and folder paths.\n\n</td></tr><tr><td>\n\n`xargs`\n\n</td><td>\n\n**grep &lt;string&gt;**\n\n</td><td>\n\nThis command is used only to create connections to IBM CTRL-M Server.Runs the command on all lists from the output.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`tnsping`|Various options|Retrieves information about Oracle connections.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`find`|Various options|Finds the base init configuration file path.|\n|`locate`|Various options|Finds the base init configuration file path if the 'find' command fails.|\n|`nodetool version`|Various options|Retrieves the Apache Cassandra version.|\n|`nodetool describecluster`|Various options|Retrieves the cluster name.|\n|`nodetool info`|Various options|Retrieves the data center and rack information|\n|`nodetool ring`|Various options|Retrieves the workload running for Apache Cassandra.|\n|`nodetool tablestats`|Various options|Retrieves list of keyspaces available on a cluster.|\n|`dse`|**–v**|Retrieves the DataStax Cassandra version.|\n|`dsetool ring`|Various options|Retrieves the workload running for DataStax Cassandra.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`show`|**context, running**|Shows the requested information.|\n|`include`|**-**|Extracts strings from the output.|\n|`echo`|**-**|Displays strings to the output.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`show`|**gslb-config domain-list**|Shows the domain list.|\n|`show`|**gslb-config dns rule**|Shows the DNS rule output.|\n|`show`|**gslb-config answer-group**|Show the VIP answer.|\n\n<table id=\"table_mgh_bkf_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`powershell`\n\n</td><td>\n\n**Add-PSSnapin Citrix.Broker.Admin.V2; Get-BrokerApplication -Name \\[entry\\_point.name\\]** \\| **select Name**,**CommandLineExecutable****,CommandLineArguments**,**WorkingDirectory**,**ApplicationType**,**BrowserName** \\| **Format-List**\n\nand\n\n**Add-PSSnapin Citrix.Broker.Admin.V2; Get-BrokerApplication -Name \\[entry\\_point.name\\] \\| select Name,CommandLineExecutable,CommandLineArguments,WorkingDirectory,ApplicationType,BrowserName \\| Format-List**\n\nAnd\n\n**Add-PSSnapin Citrix.Broker.Admin.V2; Get-BrokerMachine -DesktopGroupName ‘ \\[delivery\\_groups\\[1\\].name\\]**\n\n</td><td>\n\nGets applications managed by this Delivery Controller.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`qfarm`| |Discovers epic icons.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`get_xenapp_apps.ps1`|**\\[entry\\_point.icon\\_path\\]**|Runs powershell commands that retrieve the Citrix icon info from the Citrix repository.|\n|`powershell`|Various options|Runs powershell commands.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`cscript`|**//NoLogo**|Runs VB scripts without a popup box.|\n|`GetAppsInFolder.wsf`|**\\[entry\\_point.icon\\_path\\]**|Runs vbscript commands that retrieve the Citrix icon info from the Citrix repository.|\n\n<table id=\"table_wth_1y2_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`show`\n\n</td><td>\n\n**cs policy, cs action,cs Policy, lb vserver**\n\n</td><td>\n\nThis command is used only for discovering outgoing connections.\n\nShows the requested information.\n\n</td></tr><tr><td>\n\n`grep`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr></tbody>\n</table><table id=\"table_nwm_g1d_pdb\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`show`\n\n</td><td>\n\n**ns.conf**\n\n</td><td>\n\nThis command is used only for discovering outgoing connections if SNMP or SSH credentials are not provided.\n\nShows the contents of the ns.conf file.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|\\(For Windows only\\) Extracts strings from the output.|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`find`|Various options|\\(For Windows only\\) Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`tasklist`|Various options|Lists all running tasks.|\n|`netsh`|**http show servicestate**|Shows a snapshot of the HTTP service.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`systemctl list-units --type service`|Various options|Show the service status.|\n|`/bin/systemctl status \"+service_name+\".service`|Various options|Show the service status.|\n|`service --status-all`|Various options|Show the service status.|\n|`read /etc/services`|Various options|Allows access to the file.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`ls`|Various options|\\(On Unix only\\) Lists files and folders in the specified folder.|\n|`tail`|Various options|\\(On Unix only\\) Displays the end of the output.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`tnsping`|Various options|Retrieves information about Oracle connections.|\n|`netstat`|Various options|Lists open ports.|\n|`ss`|Various options|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|Various options|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|Various options|Lists open ports.|\n\n<table id=\"table_kv4_zx2_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`dmqdocbroker`\n\n</td><td>\n\n**-s -c getdocbasemap**\n\n and\n\n **-t \\[computer\\_system.primaryHostname\\] -s -c getdocbasemap**\n\n and\n\n **-s -c getservermap \\[docbas\\]**\n\n **-t \\[computer\\_system.primaryHostname\\] -s -c getdocbasemap**\n\n \\[docbase\\]\n\n</td><td>\n\nGets the docbase information.\n\n</td></tr><tr><td>\n\n`del`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nDeletes the XML file containing the old binding information.\n\n</td></tr><tr><td>\n\n`BTSTask`\n\n</td><td>\n\n**ExportBindings /Destination:%TEMP%\\\\MyBindings.xml /Database:\\[MgmtDbName\\] /server:\\[serverName\\]**\n\n</td><td>\n\nThis command is used only if there are not MSSQL credentials.Extracts the binding info and places it into the XML file.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|\\(For Windows only\\) Extracts strings from the output.|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n\n<table id=\"table_kfv_1kf_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(For Windows only\\) This command is used only to create CICS connections.Extracts strings from the output.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(For Windows only\\) This command is used only to create CICS connections. Lists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`type`\n\n</td><td>\n\n**-**\n\n</td><td>\n\n\\(For Windows only\\) This command is used only to create CICS connections. Displays the file content in the output.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`source`|**\\[installed\\_dir\\]db2profile**|Sets the DB2 variables.|\n|`db2`|list database directory|Displays the DB2 installation parameters.|\n|`grep`|Various options|Extracts strings from the output.|\n|`head`|**-1**|Displays only the first line from the output.|\n|`db2level`|**-**|Displays the DB2 version.|\n|`cat`|**-**|Displays the file content in the output.|\n|`xargs`|**-I \\{\\} echo list tablespace containers for \\{\\} ';'**|This command is used only to create storage connections. Runs the command on all lists from the output.|\n\n<table id=\"table_x5d_bkf_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`db2cmd`\n\n</td><td>\n\n**/c /w /i**\n\n</td><td>\n\nLists the DB2 directories.\n\n</td></tr><tr><td>\n\n`db2`\n\n</td><td>\n\nlist database directory\n\n</td><td>\n\nDisplays the DB2 installation parameters.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nFinds specific strings in files, folders, or standard output.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`db2level`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nDisplays the DB2 version.\n\n</td></tr><tr><td>\n\n`echo`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only for storage connectivity. Prints the strings in the output.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only for storage connectivity.Extracts strings from the output.\n\n</td></tr><tr><td>\n\n`for`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only for storage connectivity. Runs loops.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|Various options|Gets the DB2 name.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|Various options|Lists open ports.|\n|`find`|Various options|Finds specific strings in files and folders.|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`versionInfo.sh`|**-**|Gets the Websphere Application Server version.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`\"oeconsol 'D OMVS,A=ALL' | grep \"+$taskname`|**-**|Gets the Websphere Application Server task.|\n|`netstat`|**-a \\| grep \"+$port+\" \\| awk '\\{print $1\\}'**|Gets the task name from the listening port.|\n|`ps -ef -o user,pid,ppid,comm | awk '{print $1,$2,$3,$4}’`| |Gets attributes for processes.|\n|`$install_dir+\"/bin/versionInfo.sh | grep Version | tail -1\"`| |Gets the version from script.|\n|`$install_dir+\"/properties/version/BASE.product\"`| |Gets the version from version file \\(failover\\).|\n|`\"ls \"+$conf_dir+\"/*/*/applications/*/deployments/*/META-INF/application.xml | xargs grep \\\"<context-root>/\"+$uri_search+\"\\\"\"+\" 1>/tmp/app.txt 2>/dev/null; cat /tmp/app.txt\"`| |Gets the list of URI files.|\n|`$ear_directory_name+\"/*/*/*/wsdl/*.wsdl\"`| |Reads the wsdl files under the discovered inclusion on the Ear directory.|\n\n<table id=\"table_nym_3wl_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`grep`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\n**-name**\n\n **-type**\n\n</td><td>\n\nThis command is used only for creating the Web Services connections. Finds files and folders for the specific name.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`netstat`|Various options|Lists the open ports.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n<table id=\"table_crk_ptr_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`find`\n\n</td><td>\n\n**-name**\n\n **-type**\n\n</td><td>\n\nThis command is used only for creating the Web Services connections. Finds files and folders for the specific name.\n\n</td></tr><tr><td>\n\n`mqsiprofile`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nSets the variables for WebSphere Message Broker.\n\n</td></tr><tr><td>\n\n`mqsireportbroker`\n\n</td><td>\n\n**\\[broker name\\]**\n\n</td><td>\n\nGets the WebSphere Message Broker information.\n\n</td></tr><tr><td>\n\n`mqsibrowse`\n\n</td><td>\n\n**\\[broker name\\] -t BROKERRESOURCES**\n\n</td><td>\n\nDisplays the Message Broker information resources.\n\n</td></tr><tr><td>\n\n`echo`\n\n</td><td>\n\n**$ODBCINI**\n\n</td><td>\n\n\\(On Unix only\\) This command is used only to create connections to IBM DB2. Prints strings in the output.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`mqsiprofile`|**-**|Sets the variables for WebSphere Message Broker.|\n|`mqsireportbroker`|**\\[broker name\\]**|Gets the WebSphere Message Broker information.|\n|`ps`|**-ef**|Gets the process information.|\n|`mqsibrowse`|**\\[broker name\\] -t BROKERRESOURCES**|Displays the Message Broker information resources.|\n|`db2`| |Displays DB2 installation parameters: database directory and node directory.|\n\n<table id=\"table_g41_rtr_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`mqsiprofile`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nSets the variables for WebSphere Message Broker.\n\n</td></tr><tr><td>\n\n`mqsireportbroker`\n\n</td><td>\n\n**\\[broker name\\]**\n\n</td><td>\n\nGets the WebSphere Message Broker information.\n\n</td></tr><tr><td>\n\n`mqsibrowse`\n\n</td><td>\n\n**\\[broker name\\] -t BROKERRESOURCES**\n\n</td><td>\n\nDisplays the Message Broker information resources.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\n**-name**\n\n **-type**\n\n</td><td>\n\nThis command is used only for creating the Web Services connections. Finds files and folders for the specific name.\n\n</td></tr><tr><td>\n\n`echo`\n\n</td><td>\n\n**$ODBCINI**\n\n</td><td>\n\nThis command is used only to create connections to IBM DB2. Prints strings in the output.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`mqsiprofile`|**-**|SSets the variables for WebSphere Message Broker.|\n|`mqsireportbroker`|**\\[broker name\\]**|Gets the WebSphere Message Broker information.|\n|`ps`|**-ef**|Gets the process information.|\n|`mqsibrowse`|**\\[broker name\\] -t BROKERRESOURCES**|Displays the Message Broker information resources.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dspmq`|**-**|Gets the queue manager status.|\n|`dspmqver`|**-**|Gets the queue manager version.|\n|`runmqsc`|**\\[queue manager\\]**|Gets the queue information.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`grep`|Various options|Extracts strings from the output.|\n|`dspmq`|**-**|Gets the queue manager status.|\n|`dspmqver`|**-**|Gets the queue manager version.|\n|`runmqsc`|**\\[queue manager\\]**|Gets the queue information.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|**-a \\| grep \"+$port**|Gets the IBM MQ name.|\n|`df`|**-k \\| grep MQ\"**|Gets the file system.|\n|`\"echo \"+$netstat_info[1].mq_name+\" | cut -c1-4\"`|**-**|Gets the queue manager name.|\n|`\"oeconsol '-\"+$queue_manager+\" display qmgr ALL' \"`|**-**|Gets the MQ logical name information.|\n|`\"oeconsol '-\"+$queue_manager+\" display queue (\"+$entry_point.queue_name+\") ALL' | tr \\\"(\\\" \\\"#\\\" | tr \\\")\\\" \\\"\\\"\"`|**-**|Gets the MQ queue information together with the information on its connections.|\n|`\"oeconsol '-\"+$queue_manager+\" display queue (\"+$name+\")'\"`|**-**|Gets the MQ queue information.|\n|`\"oeconsol '-\"+$queue_manager+\" display channel(*) CONNAME where(QMNAME EQ \"+$remote_queue_mngr_name+\")'\"`|**-**|Gets the channel information.|\n|`\"oeconsol '-\"+$queue_manager+\" display qlocal(*) '\"`| |Gets the local queue information.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dspmq`|**-**|Gets the queue manager status.|\n|`dspmqver`|**-**|Gets the queue manager version.|\n|`runmqsc`|**\\[queue manager\\]**|Gets the queue information.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dspmq`|**-**|Gets the queue manager status.|\n|`dspmqver`|**-**|Gets the queue manager version.|\n|`runmqsc`|**\\[queue manager\\]**|Gets the queue information.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`find`|Various options|\\(On Windows only\\) Finds specific strings in files and folders.|\n|`netstat`|Various options|\\(On Windows only\\) Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`find`|**-name**|Finds files and folders in the specified folder.|\n|`xargs`|**grep &lt;string&gt;**|Finds strings in all files found in the output file.|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`find`|Various options|\\(For Windows only\\) Finds specific strings in files and folders.|\n|`netstat`|Various options|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`find`|**-name**|Finds files and folders in the specified folder.|\n|`xargs`|**grep &lt;string&gt;**|Finds strings in the files found in the output file.|\n|`grep`|Various options|Extracts strings from the output.|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`find`|Various options|\\(For Windows only\\) Finds specific strings in files and folders.|\n|`netstat`|Various options|Lists open ports.|\n|`ss`|Various options|Lists open ports.|\n\n<table id=\"table_ogv_zx2_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr><tr><td>\n\n`hostname`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nGets the hostname.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`tasklist`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists all running tasks.\n\n</td></tr><tr><td>\n\n`del`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nDeletes the XML file containing the old binding information.\n\n</td></tr><tr><td>\n\n`echo`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nPrints strings in the output.\n\n</td></tr><tr><td>\n\n`powershell`\n\n</td><td>\n\n**Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer -status -Identity \\[hostname\\]\\| export-clixml $env:TEMP\\\\exchange\\_pwrshell\\_output.xml**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer -status -Identity \\[hostname\\]\\| export-clixml $env:TEMP\\\\exchange\\_pwrshell\\_output.xml**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer\\| format-table -autosize -HideTableHeaders Name,Fqdn,IsMailboxServer**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer \\| format-table -autosize -HideTableHeaders Name,Fqdn,IsMailboxServer**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-MailboxServer \\| format-list**\n\n</td><td>\n\nThis command is used only if you do not use TCP connections.Gets the CAS status, server roles, and Exchange setup structure.\n\n **Important:** Do not use the dollar sign \\($\\) in credentials for Exchange CAS, because Service Mapping uses the dollar sign for pattern variables in the Powershell command.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only if PowerShell is not operational.Finds specific strings in the files and folders.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|Various options|Lists open ports.|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`echo`|Various options|Prints strings in the output.|\n\n<table id=\"table_bll_zx2_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`echo`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nPrints strings in the output.\n\n</td></tr><tr><td>\n\n`del`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nDeletes the XML file containing the old binding information.\n\n</td></tr><tr><td>\n\n`BTSTask`\n\n</td><td>\n\n**ExportBindings /Destination:%TEMP%\\\\MyBindings.xml /Database:\\[MgmtDbName\\] /server:\\[serverName\\]**\n\n</td><td>\n\nThis command is used only if there are not MSSQL credentials.Extracts the binding information and places it into the XML file.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|Various options|Lists open ports.|\n|`hostname`|**-**|Gets the hostname.|\n|`tasklist`|Various options|Lists all running tasks.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`netstat`|Various options|Lists open ports.|\n|`hostname`|**-**|Gets the hostname.|\n|`tasklist`|Various options|Lists all running tasks.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n\n<table id=\"table_ulr_xmk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr><tr><td>\n\n`hostname`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nGets the hostname.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`tasklist`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists all running tasks.\n\n</td></tr><tr><td>\n\n`echo`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nPrints strings in the output.\n\n</td></tr><tr><td>\n\n`del`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nDeletes the XML file containing the old binding information.\n\n</td></tr><tr><td>\n\n`powershell`\n\n</td><td>\n\n**Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer -status -Identity \\[entry\\_point.host\\_name\\]\\| export-clixml $env:TEMP\\\\exchange\\_pwrshell\\_output.xml**\n\nand\n\n**\"Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer -status -Identity \\[entry\\_point.host\\_name\\] \\| export-clixml $env:TEMP\\\\exchange\\_pwrshell\\_output.xml**\n\n</td><td>\n\nThis command is used only if you do not use TCP connections.Gives the CAS status, server roles, and Exchange setup structure.\n\n **Important:** Do not use the dollar sign \\($\\) in credentials for Exchange Hub Transport Server, because Service Mapping uses the dollar sign for pattern variables in the powershell command.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nFinds specific strings in files and folders.\n\n</td></tr></tbody>\n</table><table id=\"table_wgz_xmk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`appcmd.exe`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only for IIS version 7 and later.Retrieves information about the specified application name.\n\n</td></tr></tbody>\n</table><table id=\"table_erf_ymk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`appcmd.exe`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only for IIS version 7 and later.Retrieves information about the specified application name.\n\n</td></tr><tr><td>\n\n`iisapp.vbs`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only for IIS version 6.Retrieves information about the specified application name.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nFinds specific strings in files and folders.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr></tbody>\n</table><table id=\"table_hsd_51y_n5\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`ildasm.exe`\n\n</td><td>\n\ntext that contains process exe path\n\n</td><td>\n\nThis file is necessary for performing the put file operation on the ILDisassembler alias. This file disassembles strings from the command .exe file.\n\n</td></tr><tr><td>\n\n`.findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nGets the strings from the output.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists all files in the specified folder.\n\n</td></tr><tr><td>\n\n`connection_strings_browser.exe`\n\n</td><td>\n\n**\\[encrypted\\_configs\\[\\*\\].Name\\]**\n\n</td><td>\n\nThis command is used only for creating database encrypted connections. This file is necessary for performing the put file operation on theConnectionStringsBrowser alias.\n\nDecrypts the database connections.\n\n</td></tr></tbody>\n</table><table id=\"table_fpb_bnk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr><tr><td>\n\n`hostname`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nGets the hostname.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`tasklist`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists all running tasks.\n\n</td></tr><tr><td>\n\n`del`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nDeletes the XML file containing old binding information.\n\n</td></tr><tr><td>\n\n`echo`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nPrints strings in the output.\n\n</td></tr><tr><td>\n\n`powershell`\n\n</td><td>\n\n**Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer -status -Identity \\[entry\\_point.host\\_name\\]\\| export-clixml $env:TEMP\\\\exchange\\_pwrshell\\_output.xml**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer -status \\| export-clixml $env:TEMP\\\\exchange\\_pwrshell\\_output.xml**\n\n and\n\n**Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer -status -Identity \\[entry\\_point.host\\_name\\]\\| export-clixml $env:TEMP\\\\exchange\\_pwrshell\\_output.xml**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ClusteredMailBoxServerStatus \\| format-table -Property OperationalMachines**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer \\| format-table -autosize -HideTableHeaders Name,Fqdn,IsHubTransportServer**\n\n and\n\n**Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer \\| format-table -autosize -HideTableHeaders Name,Fqdn,IsHubTransportServer**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-StorageGroup -server \\[hostname\\] \\| select SystemFolderPath \\| Export-Csv out.csv -notype;cat out.csv**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-StorageGroup \\| select SystemFolderPath \\| Export-Csv out.csv -notype;cat out.csv**\n\n and\n\n **Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-MailboxDatabase \\| select LogFolderPath \\| format-table -autosize -hideTableHeaders; Get-MailboxDatabase \\| select EdbFilePath\\| format-table -autosize -hideTableHeaders;Get-MailboxDatabase \\| select TemporaryDataFolderPath\\| format-table -autosize -hideTableHeaders**\n\n</td><td>\n\nThis command is used only if you do not use TCP connections.Gets the status, server roles, and the setup structure of Exchange Mailbox.\n\n **Important:** Do not use the dollar sign \\($\\) in credentials for Exchange Mailbox, because Service Mapping uses the dollar sign for pattern variables in the Powershell command.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only if PowerShell is not operational.Finds specific strings in the files and folders.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`hostname`|**-**|Gets the hostname.|\n\n<table id=\"table_zxg_cnk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr><tr><td>\n\n`hostname`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nGets the hostname.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr><tr><td>\n\n`sqlcmd`\n\n</td><td>\n\n**-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -d \\[entry\\_point.database\\] -U \\[username\\] -P '\\[password\\]' -y 0 -h-1 -Q select nvcname\\#\\#\\#inboundtransporturl FROM adm\\_ReceiveLocation rl, bts\\_receiveport rp where rl.receiveportid=rp.nid**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -d \\[entry\\_point.database\\] -U \\[username\\] -P '\\[password\\]' -y 0 -h-1 -Qselect nID,nvcName,nApplicationID from bts\\_receiveport**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -d \\[entry\\_point.database\\] -U \\[username\\] -P '\\[password\\]' -y 0 -h-1 -Qselect nID,nvcName,nApplicationID from bts\\_sendport**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -d \\[entry\\_point.database\\] -U \\[username\\] -P '\\[password\\]' -y 0 -h-1 -Qselect nOrcPortID,nReceivePortID,nSendPortid from bts\\_orchestration\\_port\\_binding**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -d \\[entry\\_point.database\\] -U \\[username\\] -P '\\[password\\]' -y 0 -h-1 -Qselect nID,nOrchestrationID from bts\\_orchestration\\_port**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -d \\[entry\\_point.database\\] -U \\[username\\] -P '\\[password\\]' -y 0 -h-1 -Qselect nID,nvcFullName from bts\\_orchestration**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -d \\[entry\\_point.database\\] -U \\[username\\] -P '\\[password\\]' -y 0 -h-1 -Qselect ah.Name\\#\\#\\#bo.nvcNamespace.bo.nvcName\\#\\#\\#ase.Name from bts\\_orchestration bo, adm\\_Host ah,adm\\_server ase,adm\\_Server2HostMapping ash where bo.nAdminHostID = ah.ID and ase.ID = ash.ServerID and ah.ID = ash.HostID**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -d \\[entry\\_point.database\\] -U \\[username\\] -P '\\[password\\]' -y 0 -h-1 -Qselect nID,nSendPortID,nvcAddress from bts\\_sendport\\_transport**\n\n</td><td>\n\nThis command is used only to discover Microsoft BizTalk.Gets the BizTalk information from the database.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|Extracts strings from the output.|\n|`netstat`|Various options|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|Extracts strings from the output.|\n|`netstat`|Various options|Lists open ports.|\n|`sqlservr.exe`| |Gets the version of the database from the executable file.|\n\n<table id=\"table_jm1_skp_12b\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`mongo`\n\n</td><td>\n\n--eval db.printShardingStatus\\(\\)\n\n</td><td>\n\nRetrieves the status of MondoDB that is used for load balancing.\n\n</td></tr><tr><td>\n\n`mongo`\n\n</td><td>\n\n--db.Name\\(\\)\n\n</td><td>\n\nRetrieves the name of the database connected to MongoDB server.\n\n</td></tr></tbody>\n</table><table id=\"table_xrd_2nk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(On Windows only\\) Extracts strings from the output.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr><tr><td>\n\n`ss`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr><tr><td>\n\n`ps`\n\n</td><td>\n\n**--pid=\\[process.pid\\] --no-headers -o \" %U : %p : %a”**\n\n</td><td>\n\nGets the userid parameter value.\n\n</td></tr><tr><td>\n\n`mysqld-nt/mysqld/mysqld.exe`\n\n</td><td>\n\n**-V**\n\n</td><td>\n\nGets the version.\n\n</td></tr><tr><td>\n\n`mysql`\n\n</td><td>\n\n**--user=\\[username\\] --password=\\[password\\] --port=\\[jdbc\\_port\\] --skip-column-names --silent --execute=\"SHOW ENGINE NDB STATUS;;”**\n\nand\n\n**--user=\\[username\\] --password=\\[password\\] --port=\\[jdbc\\_port\\] --skip-column-names --silent --execute=\"SHOW SLAVE STATUS;;”**\n\nand\n\n**--user=\\[username\\] --password=\\[password\\] --port=\\[jdbc\\_port\\] --skip-column-names --silent --execute=\"select host from information\\_schema.processlist where command like '%%binlog%%';;”**\n\n</td><td>\n\nThis command is used only to create cluster node connections, primary replications, and the secondary.Gets the deployment structure of the MySQL server.\n\n</td></tr><tr><td>\n\n`which`\n\n</td><td>\n\n**mysql**\n\n</td><td>\n\nThis command is used only to create cluster node connections, primary replications, and the secondary.Gets the full path of MySQL cluster nodes.\n\n</td></tr></tbody>\n</table><table id=\"table_yrd_2nk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr><tr><td>\n\n`ss`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr><tr><td>\n\n`ndb_mgmd`\n\n</td><td>\n\n**-V**\n\nand\n\n**-e show**\n\n</td><td>\n\nGets the version and status of the MySQL Cluster MGM node.\n\n</td></tr></tbody>\n</table><table id=\"table_thl_2nk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`nginx`\n\n</td><td>\n\n**-v**\n\n</td><td>\n\nGets the version.\n\n</td></tr><tr><td>\n\n`egrep`\n\n</td><td>\n\n**-v -e ^\\# -e \"\\\\t\\#\"**\n\n</td><td>\n\nThis command is used if necessary to create HTTP connections.Ignores special characters.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`find`|Various options|\\(For Windows only\\) Finds specific strings in files and folders.|\n|`export`|**-**|\\(For Unix only\\) Sets variables.|\n|`echo`|Various options|Prints strings in the output.|\n|`sqlplus`|Various options|Creates the connection to the Oracle instance.|\n|`awk`|Various options|\\(For Unix only\\) Manipulates the output.|\n|`netstat`|Various options|\\(For Windows only\\) Gets open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`export`|**-**|\\(On Unix only\\) Sets a variable.|\n|`echo`|Various options|Prints strings in the output.|\n|`sqlplus`|Various options|Creates connection to the Oracle instance.|\n|`set`|**-**|\\(On Windows only\\) Sets a variable.|\n|`netstat`|Various options|\\(On Windows only\\) Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|\\(For Windows only\\) Extracts strings from the output.|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n|`netstat`|Various options|\\(For Windows only\\) Lists open ports.|\n|`awk`|Various options|\\(For Unix only\\) Manipulates the output.|\n|`find`|Various options|\\(For Windows only\\) Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|Extracts strings from the output.|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`find`|Various options|Finds specified strings in the file and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|Extracts strings from the output.|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`find`|Various options|Finds specified strings in the file and folders.|\n\n<table id=\"table_cf5_2nk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`export`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nSets the variable.\n\n</td></tr><tr><td>\n\n`sqlplus`\n\n</td><td>\n\n**-s \\[username\\]/\\[password\\]@\\[entry\\_point.instance\\]**\n\n</td><td>\n\nThis command is used only for getting the advanced queue information.Gets the Oracle version and information about advance queue.\n\n</td></tr><tr><td>\n\n`echo`\n\n</td><td>\n\n**-e set head off feed off pages 0 line 3000\\\\\\\\n\\\\\"select NAME \\|\\| '\\#\\#' \\|\\| QUEUE\\_TABLE \\|\\| '\\#\\#' \\|\\| QID \\|\\| '\\#\\#' \\|\\| QUEUE\\_TYPE \\|\\| '\\#\\#' \\|\\| RETENTION from DBA\\_QUEUES where OWNER = UPPER\\(\\[entry\\_point.scheme\\]\\);**\n\n and\n\n **set head off feed off pages 0 line 3000\\\\\\\\n\\\\\"select NAME \\|\\| '\\#\\#' \\|\\| QUEUE\\_TABLE \\|\\| '\\#\\#' \\|\\| QID \\|\\| '\\#\\#' \\|\\| QUEUE\\_TYPE \\|\\| '\\#\\#' \\|\\| RETENTION from DBA\\_QUEUES where OWNER = UPPER\\(\\[entry\\_point.scheme\\]\\);**\n\n and\n\n **select member as NEEBULA from v\\\\$logfile;**\n\n and\n\n **select value as NEEBULA from v\\\\$parameter where name='log\\_archive\\_dest'**\n\n and\n\n **select file\\_name as NEEBULA from dba\\_data\\_files;**\n\n and\n\n **select DB\\_LINK,HOST from DBA\\_DB\\_LINKS**\n\n</td><td>\n\nThis command is used only for getting the advance queue information. Gets the information about advance queue, storage devices, and database links.\n\n</td></tr><tr><td>\n\n`lsnrctl`\n\n</td><td>\n\n**version**\n\nAnd\n\n**services**\n\n</td><td>\n\nThis command is used only for discovering the real application cluster \\(RAC\\) version. Gets the RAC version.\n\n</td></tr></tbody>\n</table><table id=\"table_v3c_fnk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`set`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nSets the variable.\n\n</td></tr><tr><td>\n\n`sqlplus`\n\n</td><td>\n\n**-s \\[username\\]/\\[password\\]@\\[entry\\_point.instance\\]**\n\n</td><td>\n\nThis command is used only for getting the advance queue information.Gets the Oracle version and information about advance queue.\n\n</td></tr><tr><td>\n\n`echo`\n\n</td><td>\n\n**-e set head off feed off pages 0 line 3000\\\\\\\\n\\\\\"select NAME \\|\\| '\\#\\#' \\|\\| QUEUE\\_TABLE \\|\\| '\\#\\#' \\|\\| QID \\|\\| '\\#\\#' \\|\\| QUEUE\\_TYPE \\|\\| '\\#\\#' \\|\\| RETENTION from DBA\\_QUEUES where OWNER = UPPER\\(\\[entry\\_point.scheme\\]\\);**\n\n and\n\n **set head off feed off pages 0 line 3000\\\\\\\\n\\\\\"select NAME \\|\\| '\\#\\#' \\|\\| QUEUE\\_TABLE \\|\\| '\\#\\#' \\|\\| QID \\|\\| '\\#\\#' \\|\\| QUEUE\\_TYPE \\|\\| '\\#\\#' \\|\\| RETENTION from DBA\\_QUEUES where OWNER = UPPER\\(\\[entry\\_point.scheme\\]\\);**\n\n and\n\n **select member as NEEBULA from v\\\\$logfile;**\n\n and\n\n **select value as NEEBULA from v\\\\$parameter where name='log\\_archive\\_dest'**\n\n and\n\n **select file\\_name as NEEBULA from dba\\_data\\_files;**\n\n and\n\n **select DB\\_LINK,HOST from DBA\\_DB\\_LINKS**\n\n</td><td>\n\nThis command is used only for getting the advance queue information. Gets the information about advance queue, storage devices, and database links.\n\n</td></tr><tr><td>\n\n`lsnrctl`\n\n</td><td>\n\n**version**\n\n And\n\n **services**\n\n</td><td>\n\nThis command is used only for discovering the real application cluster \\(RAC\\) version. Gets the RAC version.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr></tbody>\n</table><table id=\"table_w3c_fnk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nThis command is used only to create the Web Services connections. Finds specified strings in the file and folders.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr></tbody>\n</table><table id=\"table_bgq_fnk_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`lsnrctl`\n\n</td><td>\n\n**version**\n\n and\n\n **status**\n\n</td><td>\n\nGets the version and status of the Oracle Net Listener.\n\n</td></tr><tr><td>\n\n`export`\n\n</td><td>\n\n**-**\n\n</td><td>\n\nSets the variable.\n\n</td></tr><tr><td>\n\n`crsctl`\n\n</td><td>\n\n**status res -t**\n\n and\n\n **config service -d**\n\n</td><td>\n\nGets the services status and configuration.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`psadmin`|Various options|Retrieves information from the PeopleSoft repository or server.|\n|`tnsping`|Various options|Retrieves information about the database instance given to the tnsping command.|\n|`sqlplus`|Various options|Connects to the database instance and runs the sql query.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|Extracts strings from the output.|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`find`|Various options|Finds specified strings in the file and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|Extracts strings from the output.|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`find`|Various options|Finds specified strings in the file and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|Lists files and folders in the specified folder.|\n|`findstr`|Various options|Extracts strings from the output.|\n|`find`|Various options|Finds specific strings in files and folders.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`find`|Various options|\\(For Windows only\\) Finds specific strings in files and folders.|\n|`versionInfo.sh`|**-**|Gets the Websphere Application Server version.|\n\n<table id=\"table_mnv_5jp_55\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious\n\n</td><td>\n\n\\(For Windows only\\) Extracts strings from the output\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious\n\n</td><td>\n\n\\(For Windows only\\) Lists all existing files in the given folder.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious\n\n</td><td>\n\n\\(For Windows only\\) Finds specific strings in files and folders.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\n**-name**\n\n</td><td>\n\nThis command is used only to create web service connections.\n\nFinds files and folders for specific name.\n\n</td></tr><tr><td>\n\n`tmadmin`\n\n</td><td>\n\n**-v**\n\n</td><td>\n\nGets the Tuxedo version.\n\n</td></tr><tr><td>\n\n`netstat`\n\n</td><td>\n\nVarious\n\n</td><td>\n\nGets open ports.\n\n</td></tr><tr><td>\n\n`ss`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists open ports.\n\n</td></tr></tbody>\n</table><table id=\"table_mr5_jnp_55\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious\n\n</td><td>\n\n\\(For Windows only\\) Extracts strings from the output\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious\n\n</td><td>\n\n\\(For Windows only\\) Lists all existing files in the given folder.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious\n\n</td><td>\n\n\\(For Windows only\\) Finds specific strings in files and folders.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\n**-name**\n\n</td><td>\n\nThis command is used only to create web service connections.\n\nFinds files and folders for specific name.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`postgres`|**-v**|Gets the version.|\n|`findstr`|Various options|\\(For Windows only\\) Extracts strings from the output.|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`ps`|**-ef**|Displays the currently running process.|\n|`grep`|Various options|Searches plain-text data sets for lines that match the regular expression.|\n|`grep`|**-v &lt;string&gt;**|Searches plain-text data sets for lines that do not match the regular expression.|\n|`ps`|**-ef \\| grep corosync \\| grep -v grep'**|Checks if the corosync process is running on the server. If the process is running, the Red Hat Cluster is running on this server.|\n|`ifconfig`|**-**|Displays the current network configuration information.|\n|`ip a`|**-**|Displays the current network configuration information.|\n|`awk`|Various options|Manipulates the output.|\n|`hostname`|**-s**|Displays the Fully Qualified Domain Name \\(FQDN\\).|\n|`hostname`|**-f**|Displays the short host name.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|\\(For Windows only\\) Extracts strings from the output.|\n|`type`|**-**| |\n|`tnsping`|**instance**|This command is used to create connections to Oracle.|\n\n<table id=\"table_nzj_1wl_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n\\(For Windows only\\) Extracts strings from the output.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`tnsping`\n\n</td><td>\n\n**instance**\n\n</td><td>\n\nThis command is used to create connections to Oracle. Gets the version.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n|`disp + work`|**-V**|Gets the version.|\n|`ping`|**-n 1**|\\(For Windows only\\) Verifies that the host is answering.|\n|`netstat`|Various options|Lists open ports.|\n|`ss`|Lists open ports.|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n|`disp + work`|**-V**|Gets the version.|\n|`ping`|**-c 1**|\\(For Unix only\\) Verifies that the host is answering.|\n|`ping`|**-n 1**|\\(For Windows only\\) Verifies that the host is answering.|\n|`netstat`|Various options|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n|`disp + work`|**-V**|Gets the version.|\n|`ping`|**-n 1**|\\(For Windows only\\) Verifies that the host is answering.|\n|`netstat`|Various options|Lists open ports.|\n|`ss`|Lists open ports.|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`hdbsql`|**-v**|Gets the version.|\n\n<table id=\"table_jtx_csn_tzb\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`hdbsql`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\n-   Gets schemas info\n-   Gets time zone\n-   Gets disk size\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n|`jlaunch`|**-V**|Gets the version.|\n|`ping`|**-n 1**|\\(For Windows only\\) Verifies that the host is answering.|\n|`netstat`|Various options|Lists the open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n|`msg_server`|**-V**|Gets the version.|\n|`ping`|**-n 1**|\\(For Windows only\\) Verifies that the host is answering.|\n|`netstat`|Various options|Lists the open ports.|\n|`ss`|Lists open ports.|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`MsMdSrv.exe`|**-n**|Gets the instance name.|\n|`netstat`|Various options|Lists the open ports.|\n\n<table id=\"table_zb3_dwl_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`MsMdSrv.exe`\n\n</td><td>\n\n**-n**\n\n</td><td>\n\nGets the instance name.\n\n</td></tr><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nFinds specified strings in the file and folders.\n\n</td></tr><tr><td>\n\n`sqlcmd`\n\n</td><td>\n\n**-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -y 0 -h-1 -E -Qselect convert\\(varchar\\(max\\), convert\\(varbinary\\(max\\),packagedata\\)\\)from msdb.dbo.sysssispackages where name = '\\[name\\]' -o \\[tmp\\_dir\\]/\\[name\\].xml**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -y 0 -h-1 -E -Qselect convert\\(varchar\\(max\\), job\\_id\\)\\#\\#\\#\\[command\\]@@@ from msdb.dbo.sysjobsteps**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -y 0 -h-1 -E -Qselect \\[name\\]\\#\\#\\#convert\\(varchar\\(max\\), job\\_id\\) from msdb.dbo.sysjobs**\n\n</td><td>\n\nThis command is used only for discovering jobs.\n\n</td></tr></tbody>\n</table><table id=\"table_ac3_dwl_45\"><thead><tr><th>\n\nCommand\n\n</th><th>\n\nParameter\n\n</th><th>\n\nDescription\n\n</th></tr></thead><tbody><tr><td>\n\n`dir`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nLists files and folders in the specified folder.\n\n</td></tr><tr><td>\n\n`findstr`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nExtracts strings from the output.\n\n</td></tr><tr><td>\n\n`find`\n\n</td><td>\n\nVarious options\n\n</td><td>\n\nFinds specified strings in the file and folders.\n\n</td></tr><tr><td>\n\n`sqlcmd`\n\n</td><td>\n\n**-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -h-1 -E -QSELECT \\[name\\]\\#\\#\\#DB FROM msdb.dbo.sysssispackages**\n\n and\n\n **-Stcp:\\[computer\\_system.managementIP\\],\\[port\\] -h-1 -E -QSELECT \\[name\\]\\#\\#\\#DB FROM msdb.dbo.sysssispackages**\n\n and\n\n **-Stcp:\\[computer\\_system.primaryManagementIP\\],\\[port\\] -h-1 -E -QSELECT \\[name\\]\\#\\#\\#JOB FROM msdb.dbo.sysjobs**\n\n and\n\n **-Stcp:\\[computer\\_system.managementIP\\],\\[port\\] -h-1 -E -Q SELECT \\[name\\]\\#\\#\\#JOB FROM msdb.dbo.sysjobs**\n\n</td><td>\n\nThis command is used only if you need to discover jobs.\n\n</td></tr></tbody>\n</table>|Command|Parameter|Description|\n|-------|---------|-----------|\n|`slapd-dirserv`|**-D \\[instance\\] -v**|Gets the version.|\n|`netstat`|Various options|Lists the open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`configutil`|**-**|Gets the JES configuration.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`dataserverv`|**-v**|Gets the version.|\n|`dir`|Various options|\\(For Windows only\\) Lists files and folders in the specified folder.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`findstr`|Various options|Extracts strings from the output.|\n|`netstat`|Various options|Lists open ports.|\n|`ping`|**-n 1\\[ip\\]**|Verifies that the SQL server is running.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`hostname`|**-**|Gets the hostname.|\n|`\"IFS=$'\\n';for i in `find \" + $tra_home + \" -type f | grep -v /tmp | egrep \\\".process$|.substvar$\\\"`; do result=`grep \\\"\" + $entry_point.queue + \"\\\" $i`; echo $i###$result@@@; done| grep -v \\\"###@@@\\\"\"`|**-**|Scans the label file and brings the actual values.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`TibcoFilesParser.ksh`|**-**|\\(For Unix only\\) This file is necessary for performing the put file operation. It replaces all tags in Tibco configuration files and puts them under the /tmp folder.|\n|`hostname`|**-**|Gets the hostname.|\n|`cd`|**-**|\\(On Unix only\\) Changes directory.|\n|`chmod`|**-**|\\(On Unix only\\) Changes file permissions.|\n|`for`|Various options|\\(On Unix only\\) Runs loops.|\n|`echo`|Various options|\\(On Unix only\\) Prints strings in the output.|\n|`if`|Various options|\\(On Unix only\\) Starts a condition.|\n|`wc`|**-l**|\\(On Unix only\\) Counts the output lines.|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`netstat`|Various options|Lists open ports.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`hostname`|**-**|Gets the hostname.|\n|`cd`|**-**|\\(On Unix only\\) Changes directory.|\n|`chmod`|**-**|\\(On Unix only\\) Changes file permissions.|\n|`for`|Various options|\\(On Unix only\\) Runs loops.|\n|`echo`|Various options|\\(On Unix only\\) Prints strings in the output.|\n|`if`|Various options|\\(On Unix only\\) Starts a condition.|\n|`wc`|**-l**|\\(On Unix only\\) Counts the output lines.|\n|`dir`|Various options|\\(On Windows only\\) Lists files and folders in the specified folder.|\n|`findstr`|Various options|\\(On Windows only\\) Extracts strings from the output.|\n|`netstat`|Various options|Lists open ports.|\n|`ss`|Lists open ports.|Lists open ports.|\n|`cut`|Various options|\\(On Unix only\\) Splits the output line.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`rm`|**-f /tmp/ems.cmd**|Prepares the EMS script.|\n|`tibemsadmin`|**-server tcp://+\\[computer\\_system.primaryManagementIP\\]:\\[port\\] -user \\[username\\] -password \\[password\\] -script \\[script\\]**|Connects to the EMS administrator and gets the list of EMS Queue consumers.|\n|`echo`|Various options|Prints strings in the output.|\n\n|Command|Parameter|Description|\n|-------|---------|-----------|\n|`rm`|**-f /tmp/ems.cmd**|Prepares the EMS script.|\n|`tibemsadmin`|**-server tcp://+\\[computer\\_system.primaryManagementIP\\]:\\[port\\] -user \\[username\\] -password \\[password\\] -script \\[script\\]**|Connects to the EMS administrator and gets the list of EMS Queue consumers.|\n|`echo`|Various options|\\(On Windows only\\) Prints strings in the output.|\n\n**Parent Topic:**[Prerequisites for performing top-down discovery using Service Mapping](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/service-mapping/prerequisites-service-mapping.md)\n\n**Related topics**  \n\n\n[Service Mapping commands requiring a privileged user](https://raw.githubusercontent.com/ServiceNow/ServiceNowDocs/australia/markdown/australia/it-operations-management/service-mapping/r_CommandsnCredentials.md)\n\n"}}