AustraliaREFERENCE GUIDE

Service Mapping commands not requiring a privileged user

ServiceNow documentation·33 min readView source ↗

On this page

Service Mapping commands not requiring a privileged user

Most of commands utilized by Service Mapping for discovery and mapping do not require elevated rights.

Review this list of commands to understand how Service Mapping uses them and to make sure that the virtual security of your company is not compromised.

You do not run these commands directly. Service Mapping uses commands requiring elevated rights as part of the following processes:

host detection
process identification on port
discovering CIs using patterns

Operating systems

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

awk

</td><td>

various options

</td><td>

Parses the string.

</td></tr><tr><td>

istat

</td><td>

file_name

</td><td>

Gets last modification time of file.

</td></tr><tr><td>

nslookup

</td><td>

hostname

</td><td>

Resolve DNS host name.

</td></tr><tr><td>

ping

</td><td>

-c count ip/host

</td><td>

Pings the host.

</td></tr><tr><td>

arp -an

</td><td>

various options

</td><td>

Shows ARP table.

</td></tr><tr><td>

grep

</td><td>

String to search

</td><td>

Finds string in previous command output.

</td></tr><tr><td>

traceroute

</td><td>

-n ip_address

</td><td>

Shows layer 3 network route to target host.

</td></tr><tr><td>

netstat

</td><td>

-an

-Aan

</td><td>

Shows open network connections.

</td></tr><tr><td>

ps

</td><td>

-eo user, pid, ppid, comm, args

</td><td>

Gets the process list.

</td></tr><tr><td>

find

</td><td>

Directory and parameters to search

</td><td>

Searches for files by name or type.

Commands Parameter Description sysvar SYSNAME Gets the system name. hostname Retrieves the device name. grep String to search Finds the string in command output. hostname - Gets the hostname. netstat -g | awk ‘{if (NR>4) print \$1,\$3}’ Gets network information. netstat -r | awk ‘{if (NR>3) print \$1,\$2,\$5}’ Gets gateway information. netstat -h | awk ‘{if (NR>4) print \$1}’ | grep -v ‘127.0.0.1’ Gets IP array. netstat -R ALL | awk ‘{if (NR>1) print \$0}’ Gets interfaces. netstat df -k | awk ‘{print \$1,\$2}’ |sed -e s’/(//‘ | sed -e s’/)//‘ 2> /dev/null Gets the file system information. ps - Gets the process list. ls Various options Lists files and folders in the specified folder. cat file-name Shows the file content. cut Various options Splits the output according to entered parameters. uname l, v, rm, s Gets the OS type.

Commands

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

nslookup

</td><td>

hostname

</td><td>

Resolves the DNS host name.

</td></tr><tr><td>

ping

</td><td>

-c count ip

host

</td><td>

Pings the host.

</td></tr><tr><td>

arp

</td><td>

-an/n

</td><td>

Shows the ARP table.

</td></tr><tr><td>

lp n

</td><td>

-an/n

</td><td>

Shows the ARP table.

</td></tr><tr><td>

grep

</td><td>

String to search

-v

hypervisor

proc

cpuinfo

-i ‘attached scsi’

var

log

dmesg

‘SCSI device’

‘Disk

UUID

</td><td>

Finds the string in previous command output.

</td></tr><tr><td>

awk

</td><td>

Various options

</td><td>

Parses the string.

</td></tr><tr><td>

netstat

</td><td>

-an

</td><td>

Shows open network connections.

</td></tr><tr><td>

ss

</td><td>

-an

</td><td>

Shows open network connections.

</td></tr><tr><td>

ps

</td><td>

-eo user, pid, ppid, comm, args, wwwx

</td><td>

Gets the process list.

</td></tr><tr><td>

egrep

</td><td>

Various options

</td><td>

Searches text in previous command output.

</td></tr><tr><td>

find

</td><td>

Directory and parameters for search

</td><td>

Searches for files by name or type.

</td></tr><tr><td>

traceroute

</td><td>

-n ip_address

</td><td>

Shows the layer 3 network route to target host.

</td></tr><tr><td>

df

</td><td>

-kP, echo

</td><td>

Extracts the information about the file system, including the size in KB.

</td></tr><tr><td>

uptime

</td><td>

Various options

</td><td>

Shows the current time, how long the system has been running, how many users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes.

</td></tr><tr><td>

date

</td><td>

Various options

</td><td>

Displays the date in the time zone on which Linux operating system is configured.

</td></tr><tr><td>

perl

</td><td>

-e ‘print time

</td><td>

Opens the Perl shell and prints time.

</td></tr><tr><td>

command

</td><td>

-v vxprint

</td><td>

This command is used in the Debug mode.

</td></tr><tr><td>

uname

</td><td>

-a

-r

</td><td>

Displays the information about the system.

</td></tr><tr><td>

ipfconfig

</td><td>

-a

</td><td>

Shows the configuration of the network interface.

</td></tr><tr><td>

ip

</td><td>

route list

-4 -o addr show

-6 -o a

String to parse

</td><td>

Displays information about network interface, including the routing table.

</td></tr><tr><td>

route

</td><td>

-n

</td><td>

Shows the IP routing table.

</td></tr><tr><td>

ip r

</td><td>

Shows the IP routing table.

</td></tr><tr><td>

sed

</td><td>

-n ‘2!p’

</td><td>

Executes a function using the SED stream editor.

</td></tr><tr><td>

bash

</td><td>

-c

</td><td>

Executes the command using the UNIX shell or command language.

</td></tr><tr><td>

waagent

</td><td>

-version 2>/dev/null

</td><td>

Displays the information extracted from the Microsoft Azure Linux agent.

Query Description Select * from Win32_ComputerSystem Gets the server basic information like serial number. Select LastModified from CIM_LogicalFile Where Name=... Gets the last modification time of a file. Select AddressWidth from Win32_Processor Gets the computer architecture (32 bit or 64 bit). Select * From Win32_Process where (ProcessId = ?) Gets the process list running on the computer. Select Name from CIM_LogicalDisk Gets the file systems on the computer, such as C: or D:. Select FileName, Extension from CIM_Directory where Drive=’drive’ and Path='path' Gets the list of files in a specific directory.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

get_process_info.exe

</td><td>

Process_id

</td><td>

Extracts information on the processes using executable created by ServiceNow.

</td></tr><tr><td>

type

</td><td>

File_name

</td><td>

Shows the text file content.

</td></tr><tr><td>

nslookup

</td><td>

Host_name

</td><td>

DNS lookup

</td></tr><tr><td>

arp

</td><td>

-a

</td><td>

Shows the ARP table.

</td></tr><tr><td>

netstat

</td><td>

-ano

</td><td>

Shows the network connections.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

Finds the string in the previous command output.

</td></tr><tr><td>

dir

</td><td>

/s /b

</td><td>

Lists files in the directories.

</td></tr><tr><td>

paping

</td><td>

–nocolor -c 1 -p

port_num

ip_address

</td><td>

Utility to run TCP ping against given host.

</td></tr><tr><td>

ping

</td><td>

-n 1

ip_address/host

</td><td>

Pings the host.

</td></tr><tr><td>

tracert

</td><td>

Ip_address

</td><td>

Shows the layer 3 network route to the target host.

</td></tr></tbody> </table>## Applications

Command Parameter Description show partition Various options Get the partition configured. sh-run all-partitions Various options Get details like virtual-server, port, service group, and pool members information. show slb virtual-server all-partitions Various options Get the status of the virtual server and hit count details. Command Parameter Description dir Various options (For Windows only) Lists files and folders in the specified folder. msg_server -V Gets the version. ping -n 1 (For Windows only) Verifies that the host is answering. netstat Various options Lists open ports. ss Various options Lists open ports. Command Parameter Description netstat Various options Gets open ports on ss Various options Lists open ports. hostname - Gets the hostname. dir Various options Lists all files in the specified folder.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

httpd

</td><td>

-V

</td><td>

Gets the version.

</td></tr><tr><td>

cut

</td><td>

Various options

</td><td>

Splits the output line.

</td></tr><tr><td>

opmnctl

</td><td>

status -fmt %cmp32%prt32%por40%pid

and

@farm status -noheaders -fsep “|” -fmt %cmp%prt%clu%ins%por

</td><td>

This command is used only for discovering the OC4J connectivity.Gets the status of the OPMN CTRL service.

</td></tr><tr><td>

sort

</td><td>

-u

</td><td>

This command is used only for discovering the Weblogic connectivity. Sorts the output.

</td></tr></tbody> </table><table id=“table_iln_xx2_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

httpd.exe

</td><td>

-V

</td><td>

Gets the version.

</td></tr><tr><td>

opmnctl

</td><td>

status -fmt %cmp32%prt32%por40%pid

and

@farm status -noheaders -fsep “|” -fmt %cmp%prt%clu%ins%por

</td><td>

This command is used only for discovering the OC4J connectivity.Gets the status of the OPMN CTRL service.

</td></tr></tbody> </table><table id=“table_zll_fwl_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

dir

</td><td>

Various options

</td><td>

(On Windows only) Lists files and folders in the specified folder.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

(On Windows only) Extracts strings from the output.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

(For Windows only) Finds specific strings in files and folders.

</td></tr><tr><td>

find

</td><td>

-name

</td><td>

Creates the web services connections. Finds specific strings in files and folders.

</td></tr><tr><td>

version.sh/version.bat

</td><td>

Gets the Tomcat version.

</td></tr><tr><td>

java -cp " + $install_directory + "/lib/catalina.jar org.apache.catalina.util.ServerInfo

</td><td>

Gets the Tomcat version.

</td></tr><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists the open ports.

</td></tr><tr><td>

find

</td><td>

-name

</td><td>

This command is used only for creating the web services connections. Finds specific strings in files and folders.

</td></tr><tr><td>

ss

</td><td>

Various options

</td><td>

(For Linux only) Lists the open ports.

Command Parameter Description dir Various options (On Windows only) Lists files and folders in the specified folder. netstat Various options (On Windows only) Lists open ports. grep Various options (On Windows only) Extracts strings from the output.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

show

</td><td>

/gtm pool [wide_ip_pool_4_cmd.pool] members

</td><td>

This command is used only to create connections to pool members.

Gets the pool members.

</td></tr><tr><td>

list

</td><td>

/gtm server [servers_from_cmd[].server] addresses

</td><td>

This command is used only to create connections to pool members.

Lists the alias server addresses.

</td></tr></tbody> </table><table id=“table_d42_2kf_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

b

</td><td>

rule [rule name] list

and

virtual address [entry_point.ip_address]

</td><td>

This command is used only for creating connections from rules.Lists existing rules on BIGPipe.

</td></tr><tr><td>

list

</td><td>

ltm rule [rule name]

and

data-group wts_routing_destination_prod | grep -A 1 [ep_uri]

</td><td>

This command is used only for creating connections from rules.Lists existing rules on TMSH.

Command Parameter Description findstr Various options (For Windows only) Extracts strings from the output. netstat Various options (For Windows only) Lists open ports.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

findstr

</td><td>

Various options

</td><td>

(For Windows only) Extracts strings from the output.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

(For Windows only) Lists files and folders in the specified folder.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

This command is used only to create connections to Control M Server.Finds file and folder paths.

</td></tr><tr><td>

xargs

</td><td>

grep <string>

</td><td>

This command is used only to create connections to IBM CTRL-M Server.Runs the command on all lists from the output.

Command Parameter Description dir Various options Lists files and folders in the specified folder. Command Parameter Description find Various options Finds the base init configuration file path. locate Various options Finds the base init configuration file path if the ‘find’ command fails. nodetool version Various options Retrieves the Apache Cassandra version. nodetool describecluster Various options Retrieves the cluster name. nodetool info Various options Retrieves the data center and rack information nodetool ring Various options Retrieves the workload running for Apache Cassandra. nodetool tablestats Various options Retrieves list of keyspaces available on a cluster. dse –v Retrieves the DataStax Cassandra version. dsetool ring Various options Retrieves the workload running for DataStax Cassandra. Command Parameter Description show context, running Shows the requested information. include - Extracts strings from the output. echo - Displays strings to the output. Command Parameter Description show gslb-config domain-list Shows the domain list. show gslb-config dns rule Shows the DNS rule output. show gslb-config answer-group Show the VIP answer.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

powershell

</td><td>

Add-PSSnapin Citrix.Broker.Admin.V2; Get-BrokerApplication -Name [entry_point.name] | select Name,CommandLineExecutable,CommandLineArguments,WorkingDirectory,ApplicationType,BrowserName | Format-List

and

Add-PSSnapin Citrix.Broker.Admin.V2; Get-BrokerApplication -Name [entry_point.name] | select Name,CommandLineExecutable,CommandLineArguments,WorkingDirectory,ApplicationType,BrowserName | Format-List

And

Add-PSSnapin Citrix.Broker.Admin.V2; Get-BrokerMachine -DesktopGroupName ‘ [delivery_groups.name]

</td><td>

Gets applications managed by this Delivery Controller.

Command Parameter Description get_xenapp_apps.ps1 [entry_point.icon_path] Runs powershell commands that retrieve the Citrix icon info from the Citrix repository. powershell Various options Runs powershell commands. Command Parameter Description cscript //NoLogo Runs VB scripts without a popup box. GetAppsInFolder.wsf [entry_point.icon_path] Runs vbscript commands that retrieve the Citrix icon info from the Citrix repository.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

show

</td><td>

cs policy, cs action,cs Policy, lb vserver

</td><td>

This command is used only for discovering outgoing connections.

Shows the requested information.

</td></tr><tr><td>

grep

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr></tbody> </table><table id=“table_nwm_g1d_pdb”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

show

</td><td>

ns.conf

</td><td>

This command is used only for discovering outgoing connections if SNMP or SSH credentials are not provided.

Shows the contents of the ns.conf file.

Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options (On Windows only) Lists files and folders in the specified folder. findstr Various options (On Windows only) Extracts strings from the output. find Various options (For Windows only) Finds specific strings in files and folders. Command Parameter Description findstr Various options (On Windows only) Extracts strings from the output. tasklist Various options Lists all running tasks. netsh http show servicestate Shows a snapshot of the HTTP service. Command Parameter Description systemctl list-units --type service Various options Show the service status. /bin/systemctl status "+service_name+".service Various options Show the service status. service --status-all Various options Show the service status. read /etc/services Various options Allows access to the file. Command Parameter Description ls Various options (On Unix only) Lists files and folders in the specified folder. tail Various options (On Unix only) Displays the end of the output. Command Parameter Description tnsping Various options Retrieves information about Oracle connections. netstat Various options Lists open ports. ss Various options Lists open ports. Command Parameter Description netstat Various options Lists open ports. Command Parameter Description netstat Various options Lists open ports.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

dmqdocbroker

</td><td>

-s -c getdocbasemap

and

-t [computer_system.primaryHostname] -s -c getdocbasemap

and

-s -c getservermap [docbas]

-t [computer_system.primaryHostname] -s -c getdocbasemap

[docbase]

</td><td>

Gets the docbase information.

</td></tr><tr><td>

del

</td><td>

Various options

</td><td>

Deletes the XML file containing the old binding information.

</td></tr><tr><td>

BTSTask

</td><td>

ExportBindings /Destination:%TEMP%MyBindings.xml /Database:[MgmtDbName] /server:[serverName]

</td><td>

This command is used only if there are not MSSQL credentials.Extracts the binding info and places it into the XML file.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

findstr

</td><td>

Various options

</td><td>

(For Windows only) This command is used only to create CICS connections.Extracts strings from the output.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

(For Windows only) This command is used only to create CICS connections. Lists files and folders in the specified folder.

</td></tr><tr><td>

type

</td><td>

(For Windows only) This command is used only to create CICS connections. Displays the file content in the output.

</td></tr></tbody> </table>|Command|Parameter|Description| |——-|———|———–| |source|[installed_dir]db2profile|Sets the DB2 variables.| |db2|list database directory|Displays the DB2 installation parameters.| |grep|Various options|Extracts strings from the output.| |head|-1|Displays only the first line from the output.| |db2level|-|Displays the DB2 version.| |cat|-|Displays the file content in the output.| |xargs|-I {} echo list tablespace containers for {} ‘;’|This command is used only to create storage connections. Runs the command on all lists from the output.|

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

db2cmd

</td><td>

/c /w /i

</td><td>

Lists the DB2 directories.

</td></tr><tr><td>

db2

</td><td>

list database directory

</td><td>

Displays the DB2 installation parameters.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

Finds specific strings in files, folders, or standard output.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

db2level

</td><td>

Displays the DB2 version.

</td></tr><tr><td>

echo

</td><td>

Various options

</td><td>

This command is used only for storage connectivity. Prints the strings in the output.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

This command is used only for storage connectivity.Extracts strings from the output.

</td></tr><tr><td>

for

</td><td>

Various options

</td><td>

This command is used only for storage connectivity. Runs loops.

Command Parameter Description netstat Various options Lists open ports. find Various options Finds specific strings in files and folders. dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. Command Parameter Description versionInfo.sh - Gets the Websphere Application Server version. Command Parameter Description ‘“oeconsol ’D OMVS,A=ALL’ grep “+$taskname` - Gets the Websphere Application Server task. netstat -a | grep “+$port+” | awk ‘{print $1}’ Gets the task name from the listening port. ‘ps -ef -o user,pid,ppid,comm awk ‘{print $1,$2,$3,$4}’` Gets attributes for processes. ‘$install_dir+“/bin/versionInfo.sh grep Version tail -1“‘ Gets the version from script. $install_dir+"/properties/version/BASE.product" Gets the version from version file (failover). ‘“ls ”+$conf_dir+“///applications//deployments//META-INF/application.xml xargs grep \“<context-root>/”+$uri_search+“\”“+” 1>/tmp/app.txt 2>/dev/null; cat /tmp/app.txt“‘ Gets the list of URI files. $ear_directory_name+"/*/*/*/wsdl/*.wsdl" Reads the wsdl files under the discovered inclusion on the Ear directory.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

grep

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr><tr><td>

find

</td><td>

-name

-type

</td><td>

This command is used only for creating the Web Services connections. Finds files and folders for the specific name.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

find

</td><td>

-name

-type

</td><td>

This command is used only for creating the Web Services connections. Finds files and folders for the specific name.

</td></tr><tr><td>

mqsiprofile

</td><td>

Sets the variables for WebSphere Message Broker.

</td></tr><tr><td>

mqsireportbroker

</td><td>

[broker name]

</td><td>

Gets the WebSphere Message Broker information.

</td></tr><tr><td>

mqsibrowse

</td><td>

[broker name] -t BROKERRESOURCES

</td><td>

Displays the Message Broker information resources.

</td></tr><tr><td>

echo

</td><td>

$ODBCINI

</td><td>

(On Unix only) This command is used only to create connections to IBM DB2. Prints strings in the output.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

mqsiprofile

</td><td>

Sets the variables for WebSphere Message Broker.

</td></tr><tr><td>

mqsireportbroker

</td><td>

[broker name]

</td><td>

Gets the WebSphere Message Broker information.

</td></tr><tr><td>

mqsibrowse

</td><td>

[broker name] -t BROKERRESOURCES

</td><td>

Displays the Message Broker information resources.

</td></tr><tr><td>

find

</td><td>

-name

-type

</td><td>

This command is used only for creating the Web Services connections. Finds files and folders for the specific name.

</td></tr><tr><td>

echo

</td><td>

$ODBCINI

</td><td>

This command is used only to create connections to IBM DB2. Prints strings in the output.

Command Parameter Description dspmq - Gets the queue manager status. dspmqver - Gets the queue manager version. runmqsc [queue manager] Gets the queue information. Command Parameter Description grep Various options Extracts strings from the output. dspmq - Gets the queue manager status. dspmqver - Gets the queue manager version. runmqsc [queue manager] Gets the queue information. Command Parameter Description netstat -a | grep “+$port Gets the IBM MQ name. df -k | grep MQ“ Gets the file system. ‘“echo ”+$netstat_info.mq_name+“ cut -c1-4“‘ - Gets the queue manager name. "oeconsol '-"+$queue_manager+" display qmgr ALL' " - Gets the MQ logical name information. ‘“oeconsol ’-”+$queue_manager+“ display queue (”+$entry_point.queue_name+“) ALL’ tr \“(\” \“#\” tr \“)\” \“\”“‘ - Gets the MQ queue information together with the information on its connections. "oeconsol '-"+$queue_manager+" display queue ("+$name+")'" - Gets the MQ queue information. "oeconsol '-"+$queue_manager+" display channel(*) CONNAME where(QMNAME EQ "+$remote_queue_mngr_name+")'" - Gets the channel information. "oeconsol '-"+$queue_manager+" display qlocal(*) '" Gets the local queue information. Command Parameter Description dspmq - Gets the queue manager status. dspmqver - Gets the queue manager version. runmqsc [queue manager] Gets the queue information. Command Parameter Description dspmq - Gets the queue manager status. dspmqver - Gets the queue manager version. runmqsc [queue manager] Gets the queue information. Command Parameter Description dir Various options (On Windows only) Lists files and folders in the specified folder. findstr Various options (On Windows only) Extracts strings from the output. find Various options (On Windows only) Finds specific strings in files and folders. netstat Various options (On Windows only) Lists open ports. Command Parameter Description find -name Finds files and folders in the specified folder. xargs grep <string> Finds strings in all files found in the output file. dir Various options (On Windows only) Lists files and folders in the specified folder. findstr Various options (On Windows only) Extracts strings from the output. find Various options (For Windows only) Finds specific strings in files and folders. netstat Various options Lists open ports. Command Parameter Description dir Various options Lists files and folders in the specified folder. Command Parameter Description find -name Finds files and folders in the specified folder. xargs grep <string> Finds strings in the files found in the output file. grep Various options Extracts strings from the output. dir Various options (On Windows only) Lists files and folders in the specified folder. findstr Various options (On Windows only) Extracts strings from the output. find Various options (For Windows only) Finds specific strings in files and folders. netstat Various options Lists open ports. ss Various options Lists open ports.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr><tr><td>

hostname

</td><td>

Gets the hostname.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

tasklist

</td><td>

Various options

</td><td>

Lists all running tasks.

</td></tr><tr><td>

del

</td><td>

Various options

</td><td>

Deletes the XML file containing the old binding information.

</td></tr><tr><td>

echo

</td><td>

Various options

</td><td>

Prints strings in the output.

</td></tr><tr><td>

powershell

</td><td>

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer -status -Identity [hostname]| export-clixml $env:TEMPexchange_pwrshell_output.xml

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer -status -Identity [hostname]| export-clixml $env:TEMPexchange_pwrshell_output.xml

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer| format-table -autosize -HideTableHeaders Name,Fqdn,IsMailboxServer

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer | format-table -autosize -HideTableHeaders Name,Fqdn,IsMailboxServer

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-MailboxServer | format-list

</td><td>

This command is used only if you do not use TCP connections.Gets the CAS status, server roles, and Exchange setup structure.

Important: Do not use the dollar sign ($) in credentials for Exchange CAS, because Service Mapping uses the dollar sign for pattern variables in the Powershell command.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

This command is used only if PowerShell is not operational.Finds specific strings in the files and folders.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

Command Parameter Description echo Various options Prints strings in the output.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

echo

</td><td>

Various options

</td><td>

Prints strings in the output.

</td></tr><tr><td>

del

</td><td>

Various options

</td><td>

Deletes the XML file containing the old binding information.

</td></tr><tr><td>

BTSTask

</td><td>

ExportBindings /Destination:%TEMP%MyBindings.xml /Database:[MgmtDbName] /server:[serverName]

</td><td>

This command is used only if there are not MSSQL credentials.Extracts the binding information and places it into the XML file.

Command Parameter Description netstat Various options Lists open ports. hostname - Gets the hostname. tasklist Various options Lists all running tasks. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr><tr><td>

hostname

</td><td>

Gets the hostname.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

tasklist

</td><td>

Various options

</td><td>

Lists all running tasks.

</td></tr><tr><td>

echo

</td><td>

Various options

</td><td>

Prints strings in the output.

</td></tr><tr><td>

del

</td><td>

Various options

</td><td>

Deletes the XML file containing the old binding information.

</td></tr><tr><td>

powershell

</td><td>

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer -status -Identity [entry_point.host_name]| export-clixml $env:TEMPexchange_pwrshell_output.xml

and

“Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer -status -Identity [entry_point.host_name] | export-clixml $env:TEMPexchange_pwrshell_output.xml

</td><td>

This command is used only if you do not use TCP connections.Gives the CAS status, server roles, and Exchange setup structure.

Important: Do not use the dollar sign ($) in credentials for Exchange Hub Transport Server, because Service Mapping uses the dollar sign for pattern variables in the powershell command.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

Finds specific strings in files and folders.

</td></tr></tbody> </table><table id=“table_wgz_xmk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

appcmd.exe

</td><td>

Various options

</td><td>

This command is used only for IIS version 7 and later.Retrieves information about the specified application name.

</td></tr></tbody> </table><table id=“table_erf_ymk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

appcmd.exe

</td><td>

Various options

</td><td>

This command is used only for IIS version 7 and later.Retrieves information about the specified application name.

</td></tr><tr><td>

iisapp.vbs

</td><td>

Various options

</td><td>

This command is used only for IIS version 6.Retrieves information about the specified application name.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

Finds specific strings in files and folders.

</td></tr><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr></tbody> </table><table id=“table_hsd_51y_n5”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

ildasm.exe

</td><td>

text that contains process exe path

</td><td>

This file is necessary for performing the put file operation on the ILDisassembler alias. This file disassembles strings from the command .exe file.

</td></tr><tr><td>

.findstr

</td><td>

Various options

</td><td>

Gets the strings from the output.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists all files in the specified folder.

</td></tr><tr><td>

connection_strings_browser.exe

</td><td>

[encrypted_configs.Name]

</td><td>

This command is used only for creating database encrypted connections. This file is necessary for performing the put file operation on theConnectionStringsBrowser alias.

Decrypts the database connections.

</td></tr></tbody> </table><table id=“table_fpb_bnk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr><tr><td>

hostname

</td><td>

Gets the hostname.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

tasklist

</td><td>

Various options

</td><td>

Lists all running tasks.

</td></tr><tr><td>

del

</td><td>

Various options

</td><td>

Deletes the XML file containing old binding information.

</td></tr><tr><td>

echo

</td><td>

Various options

</td><td>

Prints strings in the output.

</td></tr><tr><td>

powershell

</td><td>

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer -status -Identity [entry_point.host_name]| export-clixml $env:TEMPexchange_pwrshell_output.xml

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer -status | export-clixml $env:TEMPexchange_pwrshell_output.xml

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer -status -Identity [entry_point.host_name]| export-clixml $env:TEMPexchange_pwrshell_output.xml

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ClusteredMailBoxServerStatus | format-table -Property OperationalMachines

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-ExchangeServer | format-table -autosize -HideTableHeaders Name,Fqdn,IsHubTransportServer

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-ExchangeServer | format-table -autosize -HideTableHeaders Name,Fqdn,IsHubTransportServer

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-StorageGroup -server [hostname] | select SystemFolderPath | Export-Csv out.csv -notype;cat out.csv

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.Admin; Get-StorageGroup | select SystemFolderPath | Export-Csv out.csv -notype;cat out.csv

and

Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010; Get-MailboxDatabase | select LogFolderPath | format-table -autosize -hideTableHeaders; Get-MailboxDatabase | select EdbFilePath| format-table -autosize -hideTableHeaders;Get-MailboxDatabase | select TemporaryDataFolderPath| format-table -autosize -hideTableHeaders

</td><td>

This command is used only if you do not use TCP connections.Gets the status, server roles, and the setup structure of Exchange Mailbox.

Important: Do not use the dollar sign ($) in credentials for Exchange Mailbox, because Service Mapping uses the dollar sign for pattern variables in the Powershell command.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

This command is used only if PowerShell is not operational.Finds specific strings in the files and folders.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr><tr><td>

hostname

</td><td>

Gets the hostname.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr><tr><td>

sqlcmd

</td><td>

-Stcp:[computer_system.primaryManagementIP],[port] -d [entry_point.database] -U [username] -P ‘[password]’ -y 0 -h-1 -Q select nvcname###inboundtransporturl FROM adm_ReceiveLocation rl, bts_receiveport rp where rl.receiveportid=rp.nid

and

-Stcp:[computer_system.primaryManagementIP],[port] -d [entry_point.database] -U [username] -P ‘[password]’ -y 0 -h-1 -Qselect nID,nvcName,nApplicationID from bts_receiveport

and

-Stcp:[computer_system.primaryManagementIP],[port] -d [entry_point.database] -U [username] -P ‘[password]’ -y 0 -h-1 -Qselect nID,nvcName,nApplicationID from bts_sendport

and

-Stcp:[computer_system.primaryManagementIP],[port] -d [entry_point.database] -U [username] -P ‘[password]’ -y 0 -h-1 -Qselect nOrcPortID,nReceivePortID,nSendPortid from bts_orchestration_port_binding

and

-Stcp:[computer_system.primaryManagementIP],[port] -d [entry_point.database] -U [username] -P ‘[password]’ -y 0 -h-1 -Qselect nID,nOrchestrationID from bts_orchestration_port

and

-Stcp:[computer_system.primaryManagementIP],[port] -d [entry_point.database] -U [username] -P ‘[password]’ -y 0 -h-1 -Qselect nID,nvcFullName from bts_orchestration

and

-Stcp:[computer_system.primaryManagementIP],[port] -d [entry_point.database] -U [username] -P ‘[password]’ -y 0 -h-1 -Qselect ah.Name###bo.nvcNamespace.bo.nvcName###ase.Name from bts_orchestration bo, adm_Host ah,adm_server ase,adm_Server2HostMapping ash where bo.nAdminHostID = ah.ID and ase.ID = ash.ServerID and ah.ID = ash.HostID

and

-Stcp:[computer_system.primaryManagementIP],[port] -d [entry_point.database] -U [username] -P ‘[password]’ -y 0 -h-1 -Qselect nID,nSendPortID,nvcAddress from bts_sendport_transport

</td><td>

This command is used only to discover Microsoft BizTalk.Gets the BizTalk information from the database.

Command Parameter Description findstr Various options Extracts strings from the output. netstat Various options Lists open ports. sqlservr.exe Gets the version of the database from the executable file.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

mongo

</td><td>

–eval db.printShardingStatus()

</td><td>

Retrieves the status of MondoDB that is used for load balancing.

</td></tr><tr><td>

mongo

</td><td>

–db.Name()

</td><td>

Retrieves the name of the database connected to MongoDB server.

</td></tr></tbody> </table><table id=“table_xrd_2nk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

findstr

</td><td>

Various options

</td><td>

(On Windows only) Extracts strings from the output.

</td></tr><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr><tr><td>

ss

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr><tr><td>

ps

</td><td>

–pid=[process.pid] –no-headers -o “ %U : %p : %a”

</td><td>

Gets the userid parameter value.

</td></tr><tr><td>

mysqld-nt/mysqld/mysqld.exe

</td><td>

-V

</td><td>

Gets the version.

</td></tr><tr><td>

mysql

</td><td>

–user=[username] –password=[password] –port=[jdbc_port] –skip-column-names –silent –execute=“SHOW ENGINE NDB STATUS;;”

and

–user=[username] –password=[password] –port=[jdbc_port] –skip-column-names –silent –execute=“SHOW SLAVE STATUS;;”

and

–user=[username] –password=[password] –port=[jdbc_port] –skip-column-names –silent –execute=“select host from information_schema.processlist where command like ‘%%binlog%%’;;”

</td><td>

This command is used only to create cluster node connections, primary replications, and the secondary.Gets the deployment structure of the MySQL server.

</td></tr><tr><td>

which

</td><td>

mysql

</td><td>

This command is used only to create cluster node connections, primary replications, and the secondary.Gets the full path of MySQL cluster nodes.

</td></tr></tbody> </table><table id=“table_yrd_2nk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr><tr><td>

ss

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr><tr><td>

ndb_mgmd

</td><td>

-V

and

-e show

</td><td>

Gets the version and status of the MySQL Cluster MGM node.

</td></tr></tbody> </table><table id=“table_thl_2nk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

nginx

</td><td>

-v

</td><td>

Gets the version.

</td></tr><tr><td>

egrep

</td><td>

-v -e ^# -e “\t#”

</td><td>

This command is used if necessary to create HTTP connections.Ignores special characters.

Command Parameter Description export - (On Unix only) Sets a variable. echo Various options Prints strings in the output. sqlplus Various options Creates connection to the Oracle instance. set - (On Windows only) Sets a variable. netstat Various options (On Windows only) Lists open ports. Command Parameter Description findstr Various options (For Windows only) Extracts strings from the output. dir Various options (For Windows only) Lists files and folders in the specified folder. netstat Various options (For Windows only) Lists open ports. awk Various options (For Unix only) Manipulates the output. find Various options (For Windows only) Finds specific strings in files and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description findstr Various options Extracts strings from the output. dir Various options Lists files and folders in the specified folder. find Various options Finds specified strings in the file and folders. Command Parameter Description findstr Various options Extracts strings from the output. dir Various options Lists files and folders in the specified folder. find Various options Finds specified strings in the file and folders.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

export

</td><td>

Sets the variable.

</td></tr><tr><td>

sqlplus

</td><td>

-s [username]/[password]@[entry_point.instance]

</td><td>

This command is used only for getting the advanced queue information.Gets the Oracle version and information about advance queue.

</td></tr><tr><td>

echo

</td><td>

-e set head off feed off pages 0 line 3000\\n\“select NAME || ‘##’ || QUEUE_TABLE || ‘##’ || QID || ‘##’ || QUEUE_TYPE || ‘##’ || RETENTION from DBA_QUEUES where OWNER = UPPER([entry_point.scheme]);

and

set head off feed off pages 0 line 3000\\n\“select NAME || ‘##’ || QUEUE_TABLE || ‘##’ || QID || ‘##’ || QUEUE_TYPE || ‘##’ || RETENTION from DBA_QUEUES where OWNER = UPPER([entry_point.scheme]);

and

select member as NEEBULA from v\$logfile;

and

select value as NEEBULA from v\$parameter where name=‘log_archive_dest’

and

select file_name as NEEBULA from dba_data_files;

and

select DB_LINK,HOST from DBA_DB_LINKS

</td><td>

This command is used only for getting the advance queue information. Gets the information about advance queue, storage devices, and database links.

</td></tr><tr><td>

lsnrctl

</td><td>

version

And

services

</td><td>

This command is used only for discovering the real application cluster (RAC) version. Gets the RAC version.

</td></tr></tbody> </table><table id=“table_v3c_fnk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

set

</td><td>

Sets the variable.

</td></tr><tr><td>

sqlplus

</td><td>

-s [username]/[password]@[entry_point.instance]

</td><td>

This command is used only for getting the advance queue information.Gets the Oracle version and information about advance queue.

</td></tr><tr><td>

echo

</td><td>

and

select member as NEEBULA from v\$logfile;

and

select value as NEEBULA from v\$parameter where name=‘log_archive_dest’

and

select file_name as NEEBULA from dba_data_files;

and

select DB_LINK,HOST from DBA_DB_LINKS

</td><td>

This command is used only for getting the advance queue information. Gets the information about advance queue, storage devices, and database links.

</td></tr><tr><td>

lsnrctl

</td><td>

version

And

services

</td><td>

This command is used only for discovering the real application cluster (RAC) version. Gets the RAC version.

</td></tr><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr></tbody> </table><table id=“table_w3c_fnk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

This command is used only to create the Web Services connections. Finds specified strings in the file and folders.

</td></tr><tr><td>

netstat

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr></tbody> </table><table id=“table_bgq_fnk_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

lsnrctl

</td><td>

version

and

status

</td><td>

Gets the version and status of the Oracle Net Listener.

</td></tr><tr><td>

export

</td><td>

Sets the variable.

</td></tr><tr><td>

crsctl

</td><td>

status res -t

and

config service -d

</td><td>

Gets the services status and configuration.

Command Parameter Description findstr Various options Extracts strings from the output. dir Various options Lists files and folders in the specified folder. find Various options Finds specified strings in the file and folders. Command Parameter Description findstr Various options Extracts strings from the output. dir Various options Lists files and folders in the specified folder. find Various options Finds specified strings in the file and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options Lists files and folders in the specified folder. findstr Various options Extracts strings from the output. find Various options Finds specific strings in files and folders. Command Parameter Description dir Various options (On Windows only) Lists files and folders in the specified folder. findstr Various options (On Windows only) Extracts strings from the output. find Various options (For Windows only) Finds specific strings in files and folders. versionInfo.sh - Gets the Websphere Application Server version.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

findstr

</td><td>

Various

</td><td>

(For Windows only) Extracts strings from the output

</td></tr><tr><td>

dir

</td><td>

Various

</td><td>

(For Windows only) Lists all existing files in the given folder.

</td></tr><tr><td>

find

</td><td>

Various

</td><td>

(For Windows only) Finds specific strings in files and folders.

</td></tr><tr><td>

find

</td><td>

-name

</td><td>

This command is used only to create web service connections.

Finds files and folders for specific name.

</td></tr><tr><td>

tmadmin

</td><td>

-v

</td><td>

Gets the Tuxedo version.

</td></tr><tr><td>

netstat

</td><td>

Various

</td><td>

Gets open ports.

</td></tr><tr><td>

ss

</td><td>

Various options

</td><td>

Lists open ports.

</td></tr></tbody> </table><table id=“table_mr5_jnp_55”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

findstr

</td><td>

Various

</td><td>

(For Windows only) Extracts strings from the output

</td></tr><tr><td>

dir

</td><td>

Various

</td><td>

(For Windows only) Lists all existing files in the given folder.

</td></tr><tr><td>

find

</td><td>

Various

</td><td>

(For Windows only) Finds specific strings in files and folders.

</td></tr><tr><td>

find

</td><td>

-name

</td><td>

This command is used only to create web service connections.

Finds files and folders for specific name.

Command Parameter Description ps -ef Displays the currently running process. grep Various options Searches plain-text data sets for lines that match the regular expression. grep -v <string> Searches plain-text data sets for lines that do not match the regular expression. ps -ef | grep corosync | grep -v grep’ Checks if the corosync process is running on the server. If the process is running, the Red Hat Cluster is running on this server. ifconfig - Displays the current network configuration information. ip a - Displays the current network configuration information. awk Various options Manipulates the output. hostname -s Displays the Fully Qualified Domain Name (FQDN). hostname -f Displays the short host name. Command Parameter Description findstr Various options (For Windows only) Extracts strings from the output. type - tnsping instance This command is used to create connections to Oracle.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

findstr

</td><td>

Various options

</td><td>

(For Windows only) Extracts strings from the output.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

tnsping

</td><td>

instance

</td><td>

This command is used to create connections to Oracle. Gets the version.

Command Parameter Description dir Various options (For Windows only) Lists files and folders in the specified folder. disp + work -V Gets the version. ping -c 1 (For Unix only) Verifies that the host is answering. ping -n 1 (For Windows only) Verifies that the host is answering. netstat Various options Lists open ports. Command Parameter Description dir Various options (For Windows only) Lists files and folders in the specified folder. disp + work -V Gets the version. ping -n 1 (For Windows only) Verifies that the host is answering. netstat Various options Lists open ports. ss Lists open ports. Lists open ports. Command Parameter Description hdbsql -v Gets the version.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

hdbsql

</td><td>

Various options

</td><td>

Gets schemas info
Gets time zone
Gets disk size

Command Parameter Description dir Various options (For Windows only) Lists files and folders in the specified folder. msg_server -V Gets the version. ping -n 1 (For Windows only) Verifies that the host is answering. netstat Various options Lists the open ports. ss Lists open ports. Lists open ports. Command Parameter Description MsMdSrv.exe -n Gets the instance name. netstat Various options Lists the open ports.

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

MsMdSrv.exe

</td><td>

-n

</td><td>

Gets the instance name.

</td></tr><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

Finds specified strings in the file and folders.

</td></tr><tr><td>

sqlcmd

</td><td>

-Stcp:[computer_system.primaryManagementIP],[port] -y 0 -h-1 -E -Qselect convert(varchar(max), convert(varbinary(max),packagedata))from msdb.dbo.sysssispackages where name = ‘[name]’ -o [tmp_dir]/[name].xml

and

-Stcp:[computer_system.primaryManagementIP],[port] -y 0 -h-1 -E -Qselect convert(varchar(max), job_id)###[command]@@@ from msdb.dbo.sysjobsteps

and

-Stcp:[computer_system.primaryManagementIP],[port] -y 0 -h-1 -E -Qselect [name]###convert(varchar(max), job_id) from msdb.dbo.sysjobs

</td><td>

This command is used only for discovering jobs.

</td></tr></tbody> </table><table id=“table_ac3_dwl_45”><thead><tr><th>

Command

</th><th>

Parameter

</th><th>

Description

</th></tr></thead><tbody><tr><td>

dir

</td><td>

Various options

</td><td>

Lists files and folders in the specified folder.

</td></tr><tr><td>

findstr

</td><td>

Various options

</td><td>

Extracts strings from the output.

</td></tr><tr><td>

find

</td><td>

Various options

</td><td>

Finds specified strings in the file and folders.

</td></tr><tr><td>

sqlcmd

</td><td>

-Stcp:[computer_system.primaryManagementIP],[port] -h-1 -E -QSELECT [name]###DB FROM msdb.dbo.sysssispackages

and

-Stcp:[computer_system.managementIP],[port] -h-1 -E -QSELECT [name]###DB FROM msdb.dbo.sysssispackages

and

-Stcp:[computer_system.primaryManagementIP],[port] -h-1 -E -QSELECT [name]###JOB FROM msdb.dbo.sysjobs

and

-Stcp:[computer_system.managementIP],[port] -h-1 -E -Q SELECT [name]###JOB FROM msdb.dbo.sysjobs

</td><td>

This command is used only if you need to discover jobs.

Command Parameter Description configutil - Gets the JES configuration. Command Parameter Description dataserverv -v Gets the version. dir Various options (For Windows only) Lists files and folders in the specified folder. Command Parameter Description findstr Various options Extracts strings from the output. netstat Various options Lists open ports. ping -n 1 Verifies that the SQL server is running. Command Parameter Description hostname - Gets the hostname. "IFS=$'\n';for i in find “ + $tra_home + ” -type f grep -v /tmp egrep \“.process$ .substvar$\“; do result=grep \”“ + $entry_point.queue + ”\“ $i`; echo $i###$result@@@; done grep -v \“###@@@\”“‘ - Scans the label file and brings the actual values. Command Parameter Description TibcoFilesParser.ksh - (For Unix only) This file is necessary for performing the put file operation. It replaces all tags in Tibco configuration files and puts them under the /tmp folder. hostname - Gets the hostname. cd - (On Unix only) Changes directory. chmod - (On Unix only) Changes file permissions. for Various options (On Unix only) Runs loops. echo Various options (On Unix only) Prints strings in the output. if Various options (On Unix only) Starts a condition. wc -l (On Unix only) Counts the output lines. dir Various options (On Windows only) Lists files and folders in the specified folder. findstr Various options (On Windows only) Extracts strings from the output. netstat Various options Lists open ports. Command Parameter Description hostname - Gets the hostname. cd - (On Unix only) Changes directory. chmod - (On Unix only) Changes file permissions. for Various options (On Unix only) Runs loops. echo Various options (On Unix only) Prints strings in the output. if Various options (On Unix only) Starts a condition. wc -l (On Unix only) Counts the output lines. dir Various options (On Windows only) Lists files and folders in the specified folder. findstr Various options (On Windows only) Extracts strings from the output. netstat Various options Lists open ports. ss Lists open ports. Lists open ports. cut Various options (On Unix only) Splits the output line. Command Parameter Description rm -f /tmp/ems.cmd Prepares the EMS script. tibemsadmin -server tcp://+[computer_system.primaryManagementIP]:[port] -user [username] -password [password] -script [script] Connects to the EMS administrator and gets the list of EMS Queue consumers. echo Various options Prints strings in the output. Command Parameter Description rm -f /tmp/ems.cmd Prepares the EMS script. tibemsadmin -server tcp://+[computer_system.primaryManagementIP]:[port] -user [username] -password [password] -script [script] Connects to the EMS administrator and gets the list of EMS Queue consumers. echo Various options (On Windows only) Prints strings in the output.

Parent Topic:Prerequisites for performing top-down discovery using Service Mapping

Keep exploring.

Find another answer, or bring this documentation into your own tools.

Search the library →Read via the REST API ↗